Important Precautions
Please read these safety precautions carefully before using the display.
Warning | Failure to follow those warnings may result in death, serious injury |
or damage to the display or other property. |
Electrical Power Related Precautions
Warning
nUse only the power cord supplied with the unit or another manufacturer’s authorized cord.
-Failure to do so may result in fire or electrical shock or damage to the display.
nUse only a properly grounded plug and receptacle.
-If you do not, you may be electrocuted or injured. Or the display might be damaged.
nDo not use a damaged or loose plug.
-This may cause electrical shock or fire.
nOperate the display only from a power source (i.e. voltage) indicated in the product specification.
-Otherwise, the display can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of power supply you have, consult a certified electrician.
nIn the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous.
-It can cause electric shock.
nDo not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the display.
-A fire can break out due to overheating.
nDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord.
-You may be electrocuted due to excess moisture.
nIf you do not intend to use the display for a long time, unplug the power cord from the display.
-Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
nInsert the power plug firmly so it cannot come loose.
-A loose connection can cause fire. Hold the plug when pulling out the power cord.
nDo not pull the plug out by the wire. Do not bend the power cord with excessive force or put heavy objects on the power cord.
-The power line can be damaged, which may cause electric shock or fire.
nDo not insert metal or other conductive materials into the display openings. Additionally, do not touch the power cord right after plugging the cable into the wall input terminal.
-You may be electrocuted.
nThe power supply cord is used as the main disconnection device. The
nDo not unplug the power cord while the display is in use.
-Electrical shock can damage the product.
nAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
1