JVC AV-36D501, AV-32D501 manual Button Functions PIP, Channel +/- For PIP

28 Button Functions - PIP

PIP (Picture-In-Picture)

PIP displays two separate pictures on screen. Your D-Series television has 2-Tuner PIP, meaning you can view pictures from two different channels simultaneously. A special set of PIP control buttons are located on the upper part of the remote control. Descriptions of each button appear on this page.

Note: PIP is available on model D501 Series sets only.

ON/MOVE

Turn PIP on by pressing the ON/MOVE button.

(PIP) ON/MOVE

07

02

EXIT to turn PIP off

Once PIP is turned on, you can move the PIP window to any of the TV’s main picture’s four corners with the ON/MOVE button.

ON/MOVE

•Each press of ON/MOVE will shift the PIP window to a different corner.

FREEZE

Use the FREEZE button to lock a single, still image onto the PIP window.

FREEZE

•If PIP is off when FREEZE is pressed, a snapshot of the main screen is taken and placed in the PIP window.

•If PIP is on when FREEZE is pressed, the image in the window when the button was pressed is held.

SWAP

You can exchange the channel displayed on the main screen for the one shown in the PIP window by pressing SWAP.

SWAP

CHANNEL +/- For PIP

Like the main CHANNEL +/- buttons, CHANNEL +/- for PIP lets you scan through the channels in the PIP window.

CHANNEL +/-

•Direct channel selection with the 10 key pad for PIP is not possible.

SOURCE

You can select the signal source for the PIP window image.

SOURCE

•If the PIP does not have a signal, the window will be blue.

•If you connect a DVD to Video-2, the PIP window will be blue.

NOTES:

•In order for PIP to work, the television must be set to “TV mode”. If you play a videotape, your TV will switch to “VCR mode”. The TV only sees one signal in VCR mode. In order to use PIP, press the INPUT button to return to TV Mode.

•The PIP window is 1/9 the size of the full screen.

•PIP will not display blocked channels or programs. A blue screen will display instead.