Button Functions 27
BBE
BBE high definition audio adds natural, clear and extrardinary sound quality to any program. Turn BBE On or Off using the BBE button.
BBE | ON OFF |
|
|
Hyper Surround
Creates a deep,
HYPER SURROUND ON OFF
Muting
Return+
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels.
RETURN+ and hold for three seconds
RETURN CHANNEL
PROGRAMMED !
Scan using the Channel+/- buttons
RETURN+
The MUTING button instantly turns the volume down completely when you press it.
MUTING
The volume level will instantly go to zero.
•To restore the volume to its previous level, press MUTING again.
Number Buttons - 10 Key Pad
To move directly to a specific channel, enter the channel number with the number buttons on the remote. For example, to move to Channel 7:
0 (zero)
7 (seven)
100+ Button
Use the 100+ button to directly access channels above Channel 99. For example to move to channel 124:
100+
You will return to your programmed channel.
•To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The message “RETURN CHANNEL CANCELLED!” will appear.
•Return+ works only with
•Return+ does not effect the PIP channel.
•For more information on Return and Return+, turn to page 11.
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions include: play, record, rewind,
•The remote is preset with the code 000 to control
2 (two)
4 (four)
NOTES:
Light (D501 Models Only)
The
LIGHT
BBE is a registered trademark of BBE Sound, Inc. For U.S., licensed from BBE Sound, Inc. under USP 4638258, 4482866 and 5510572. For Canada, licensed from BBE Sound, Inc. BBE is a registered trademark of BBE Sound, Inc.