JVC EM32T, EM37TB user manual Sleep Timer, Add Channel, Delete Channel, Partial Scan Channels

Partial Scan Channels

You can partially scan for network signal within a speciange of channels.

1Press MENU.

2	Press	or	to select artial Channel Scan, then press		or OK.
3	Press	or	to select can Mode, then press	or OK.

4Press or to select an option, then press OK.

tAnalog/Digitalor both analog and digital channels

tAnalogor analog channels

titalor digital channels

5Press or to select rom Channel, then enter a starting channel range.

6Press or to select To Channel, then enter an ending channel range.

7 Press or to select tart Scan, then press OK.

Scanning progress is displayed on the menu screen. To stop scan, select top Scan and press OK.

Add Channel

New channels may be added to your area periodically. Use the Add Channel function to add new channels.

1Press MENU.

2	Press	or	to select Channel, then press	or OK.
3	Press	or	to select ind Channel, then press	or OK.
4	Press	or	to select ter Channel, then enter a channel.
5	Press	to selectAdd Channel, then press OK.

Added channels are listed on the Channel List screen.

Delete Channel

To remove a channel from the Channel List screen.

1Press MENU.

2	Press	or	to select Channel, then press	or OK.
3	Press	or	to select Channel Management, then press		or OK.

4Press or , then press OK to mark the channels that you want to remove from the Channel List.

5Press RETURN to close the menu screen.

Sleep Timer

Sleep timer sets the TV to automatically turn oter a preset amount of time. See page 21.

30