Pcfm

PCFM Manual.qxd 7/10/03 1:13 PM Page 3

Safeguards

11.Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appli- ance dealer or local power company.

12.Power-cord Protection: Power-supply cords should be routed so they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords and plugs, conven- ience receptacles, and the point where they exit from the appliance.

13.Lightning: For added protection for this product during a lightning storm, or when it is left unattended or unused for long periods of time, the unit should be disconnected from power source.

14.Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power cir- cuits, where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them may be fatal.

15.Overloading: Do not overload wall outlets and extension cords as this can result in risk of fire or electric shock.

16.Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

17.Servicing: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18.Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the fol- lowing conditions:

a.When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the product.

c.If the product has been exposed to rain or water.

d.If the product does not operate normally by following the oper- ating instruction. Adjust only those controls that are covered by the operating instructions. An improper adjustment may result in damage and will often require extensive work by a qualified tech- nician to restore the product to its normal operation.

e.If the product has been dropped or the cabinet has been damaged.

f.When the product exhibits a distinct change in performance— this indicates a need for service.

19.Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock or other hazards.

20.Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to deter- mine that the product is in proper operating conditions.

21.Outdoor Antenna Grounding: Before attempting to install this product, be sure the antenna or cable system is grounded so as to

provide some protection against voltage surges and built-up static charges.

a.Use No.10 AWG (5.3mm) copper, No.8 AWG (8.4mm) alu- minum, No.7 AWG (10mm) copper-clad steel or bronze wire or larger, as ground wire.

b.Secure antenna lead-in and ground wires to house with stand- off insulators spaced from 4 feet (1.22m) to 6 feet (1.83m) apart.

c.Mount antenna discharge unit as close as possible to where lead-in enters house.

d.A driven rod may be used as the grounding electrode where other types of electrode systems do not exist. Refer to the National Electrical Code, ANSI/NFPA 70-1984 for information.

e.Use jumper wire not smaller than No.6 AWG (13.3mm) copper or equivalent, when a separate antenna grounding electrode is used.

NOTE TO THE CATV SYSTEM INSTALLER

THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER’S ATTENTION TO ARTICLE 820-22 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.

Ph: 800-421-6511 www.picomacom.com

Rev. 07/03

FM Stereo Audio Modulator specifications

The Pico Macom FM Stereo Audio Modulator is an advanced device designed to enhance the audio broadcasting experience for various applications. This modulator is particularly renowned for its ability to transmit high-quality audio over FM frequency ranges, making it an ideal choice for businesses, private users, and audio professionals.

One of the main features of the Pico Macom FM Stereo Audio Modulator is its high-fidelity stereo sound output. With a superior signal-to-noise ratio, this device ensures that the audio quality remains pristine, minimizing distortion and interference even at extended distances. The modulator supports various audio inputs, allowing users to connect a range of devices such as microphones, mixers, and more, facilitating flexibility in how audio content is sourced.

In addition to its impressive sound quality, the Pico Macom FM Stereo Audio Modulator employs state-of-the-art technology to ensure reliability and ease of use. The unit features a user-friendly interface with straightforward controls that enable quick adjustments to the audio levels, frequency selection, and modulation settings. With built-in LED indicators, users can effortlessly monitor the operational status of the device.

Another significant characteristic of this modulator is its ability to operate across a wide frequency range, which allows for broadcasting in diverse environments. Users can easily select and change frequencies to avoid interference from other signals, ensuring a clear and uninterrupted audio experience. The modulator also comes equipped with a robust power output, capable of transmitting signals over considerable distances while maintaining exceptional sound quality.

The Pico Macom FM Stereo Audio Modulator is designed with versatility in mind. It can be utilized in various settings, including educational institutions, religious organizations, corporate events, and even for personal use at home. It is particularly beneficial for live events, allowing for seamless audio transmission to multiple receivers.

In summary, the Pico Macom FM Stereo Audio Modulator is a powerful and versatile tool for anyone looking to enhance their audio broadcasting capabilities. With its high-quality stereo sound, user-friendly design, and robust features, it stands out as an essential device for a wide range of audio applications. Whether you're a professional audio engineer or a hobbyist, this modulator is sure to meet your audio transmission needs effectively.