Quick Setup | |
|
|
Auto Tuner Setup
In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels. There are two tuner modes to choose from, ANALOG or DIGITAL.
AUTO TUNER SETUP
IN ANALOG
TUNER MODE
AIR 
IN DIGITAL
| TUNER MODE | ATSC |
|
| START |
|
|
|
|
|
|
| SELECT OPERATE | MENU EXIT | |
è To choose CABLE or AIR (or SKIP when you skip Analog Auto Tuner Setup)
π† To TUNER MODE (IN DIGITAL)
è To choose ATSC or Digital Cable (or SKIP when you skip Digital Auto Tuner Setup)
†To START
After Analog Auto Tuner Setup is finished, Digital Auto Tuner Setup starts.
Now Programming...
20
NOW
PROGRAMMING !
48
When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your quick setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
•If you want to cancel the Auto Tuner Setup, press the MENU button.
•Noise muting will not work during Auto Tuner Setup.
•If you choose SKIP, it finished without doing the Auto Tuner Setup.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal.
STOP The Quick Setup is complete
29