Adjusting the Menu Settings
Partial Scan Channels
You can partially scan for network signal within a specified range of channels. 1 Press MENU.
2 Press 
or 
to select “Partial Channel Scan”, then press 
or OK.
3 Press 
or 
to select “Scan Mode”, then press 
or OK.
4 Press 
or 
to select an option, then press OK.
•“Analog/Digital”: scan for both analog and digital channels
•“Analog”: scan for analog channels
•“Digital”: scan for digital channels
5 Press 
or 
to select “From Channel”, then enter a starting channel range.
6 Press 
or 
to select “To Channel”, then enter an ending channel range.
7 Press 
or 
to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.
Add Channel
New channels may be added to your area periodically. Use the Add Channel function to add new channels.
1 | Press MENU. |
|
| |
2 | Press | or | to select “Channel”, then press | or OK. |
3 | Press | or | to select “Find Channel”, then press or OK. | |
4 | Press | or | to select “Enter Channel”, then enter a channel. | |
5 | Press | to select “Add Channel”, then press OK. | ||
Added channels are listed on the Channel List screen. | ||||
Delete Channel |
| |||
To remove a channel from the Channel List screen. |
| |||
1 | Press MENU. |
|
| |
2 | Press | or | to select “Channel”, then press | or OK. |
3 | Press | or | to select “Channel Management”, then press or OK. | |
4 | Press | or | , then press OK to mark the channels that you want to remove from the | |
Channel List.
5 Press RETURN to close the menu screen.
Sleep Timer
Sleep timer sets the TV to automatically turn off after a preset amount of time. See page 21.
36