JVC LT-42E488, LT-37E478, LT-37E488, LT-32E488 manual Natural Cinema, Position Adjustment

Picture Adjust

Natural Cinema

Natural cinema corrects the problem of blurred edges which may occur when viewing a program originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges of these programs, choose "Natural Cinema" and set it to "Auto". Natural Cinema helps correct conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the television rate of 30 frames-per-second.

Press the MENU button

	To "Picture Adjust"	Natural Cinema
π†
		Auto
è	To enter
π†	To "Natural Cinema"	Off
è	To enter
π†	To select the mode "Auto" or "Off”

Press the MENU button when finished

Note:

• Natural Cinema is only applied for SD 480i signal.

Position Adjustment

Position adjustment allows you to adjust the position of the picture.

	Press the MENU button
π†	To "Picture Adjust"
è	To enter
π†	To "Position Adjustment"
è	To enter
π†	To adjust the position
	Press the MENU button to finish
			OK	BACK	MENU
		Operate	Reset	Back	Exit

Notes:

•To reset the adjustment to the center, press the OK button.

•When the arrow disappears, while you are adjusting the position, the position is at it’s maximum limit.

•If you select Regular, Slim or Full size with aspect, position adjustment option is not seen.

•When you change the screen size, perform the position adjustment again.

•Position adjustment allows you to adjust the screen position horizontally when the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals.

48