Blade Care, Belt Care | MTD V560 instruction

Blade Care

WARNING: When removing cutting blade for sharpening or replacement, protect your hands with a pair of heavy gloves or use a heavy rag to hold blade.

1.Disconnect spark plug wire from spark plug. Turn mower on its side making sure that the air filter and the carburetor are up.

2.Remove bolt, blade bell support, blade, and blade adapter from the engine crankshaft. See Figure 5-3.

3.The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen the blade while it is still on the mower. When sharpening blade, follow original angle of grind. Grind cutting edges equally to keep blade balanced.

4.Remove blade from the adapter for testing balance. Balance the blade on a round shaft screwdriver to check. Remove metal from the heavy side until it balances evenly.

WARNING: An unbalanced blade will cause excessive vibration when rotating at high speeds. It may cause damage to mower, and could break causing personal injury.

5.Lubricate the engine crankshaft and the inner surface of the blade adapter with light oil. Slide the blade adapter onto the engine crankshaft. Place the blade on the adapter such that the side of the blade marked “Bottom” (or with part number) faces the ground when the mower is in the operating position. Make sure that blade is aligned and seated on blade adapter flanges.

6.Place blade bell support on the blade. Align notches on the blade bell support with small holes in blade. Replace hex bolt and tighten hex bolt to torque: 450 in. lbs. min., 600 in. lbs. max.

To ensure safe operation of your mower, periodically check the blade bolt for correct torque.

Figure 5-3

Figure 5-4

Maintaining

Your Lawn

Mower

WARNING

When removing the cutting blade for sharpening or replacement or when sliding the belt around it, protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade.

An unbalanced blade will cause excessive vibration when rotat-

Belt Care

1.Remove two shoulder screws securing front drive cover to mower deck. See Figure 5-4. Press inward on sides of front drive cover and release tabs that secure it to the height adjuster brackets. Remove drive cover from mower.

2.Pull up on the belt keeper wire and pivot it out away from the drive pulley. See Figure 5-4 inset.

3.Roll the belt off the transmission pulley. Tip mower on its side with the air filter up to access belt from underside of mower. Slide belt off of engine pulley and thread through the opening in the belt keeper bracket. Then remove the belt from around the blade by remov- ing over one end at a time. See Figure 5-5.

Figure 5-5

4.Replace with new belt, working around blade and up through the belt keeper bracket. Make sure belt is firmly seated on engine pulley while pulling from the other side and sliding it around the transmis- sion pulley. Pivot the belt keeper wire back into its operating position and snap into the slot provided. Reassemble front drive cover.

ing at high speeds. It may cause damage to mower, and could break causing per- sonal injury.

V560 specifications

The MTD V560 is a versatile and powerful lawn mower designed to meet the demands of both residential and commercial landscapers. This model integrates advanced technology and user-friendly features to ensure efficient and effective operation, making it a popular choice among users who seek reliability and performance.

One of the standout features of the MTD V560 is its robust engine. Powered by a reliable gasoline engine, the V560 boasts impressive horsepowers, providing ample power for tackling thick grass and uneven terrain. This engine is designed for fuel efficiency, ensuring longer run times while minimizing fuel consumption, which is an essential consideration for sustainability-conscious users.

With a cutting width of 21 inches, the MTD V560 allows for quick mowing of large areas, significantly reducing the time spent on lawn care. The cutting height can be easily adjusted to accommodate various grass types and conditions, giving users the flexibility to achieve their desired lawn appearance. The mower features a durable steel deck that can withstand the rigors of regular use, ensuring longevity and a finished lawn that looks pristine.

The MTD V560 incorporates innovative mulching technology that efficiently cuts grass clippings into fine pieces. This feature not only enhances the appearance of the lawn but also provides natural fertilization as clippings decompose. Additionally, the mower includes a side discharge option for users who prefer this method of grass disposal, contributing to efficient mowing operations.

User comfort is a priority with the MTD V560, which is equipped with ergonomic handles that reduce strain during extended use. The lightweight design of the mower enhances maneuverability, allowing for easy navigation around flowerbeds, trees, and other obstacles.

Another key characteristic of the V560 is its easy starting technology, ensuring that users can start mowing without hassle. Furthermore, maintenance is simplified with accessible components, enabling quick blade cleaning and oil changes.

In summary, the MTD V560 combines power, efficiency, and user convenience, making it an excellent choice for anyone looking to maintain a well-manicured lawn. With its advanced engine technology, versatile cutting options, and ergonomic design, the MTD V560 is engineered for both performance and comfort, catering to the needs of diverse lawn care enthusiasts.