Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 22 as the interactive
Press the MENU button π† To AUTO TUNER SETUP √® To operate
è To choose CABLE or AIR Press the OK button to start
���� ����� �����
����� ���� �����
����� �� �� �����
������ ������� ���� ����
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished
Channel Summary
Channel summary allows you to customize the
Press the MENU button π† To CHANNEL SUMMARY √® To operate
The Channel summary screen will now be displayed with the channels set to scan marked with an “√”. You can delete channels from the scan by removing the “√”. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an “√” next to the channel number.
π†√® To the SCAN column
Press the OK button to include or delete from scan
Press the MENU button when finished
You can block access to a channel by activating the channel lock. Press the MENU button
π† To CHANNEL SUMMARY √® To operate
π†√® To the Lock Column ( )
Press the ZERO button to lock or unlock that channel Press the MENU button when finished
������� �������
����� ���� ����� ����
����
�� | �� |
|
�� | �� |
|
�� | �� |
|
�� | �� |
|
|
|
|
| ������ �� ������� | ���� ���� |
30