Button Functions
Power
Turns the TV on or off.
Press the POWER button
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7:
0 (Zero)
7 (Seven)
100+ Button
Use the 100+ button to directly access channels above channel 99. For example, to move to channel 124, press 100+, 2 (Two), 4 (Four).
Input
Selects the signal input source for the television:
INPUT 1, 2, 3
Notes:
•When you return to TV mode, press the RETURN +/TV button or direct 10 key pad.
•You can also access the FRONT CONTROL PANEL screen by using the MENU button on the front of the TV instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST screen, and it has INPUT and ASPECT menus. Choose INPUT or
ASPECT by pressing MENU† on the front panel and choose input or aspect by using the CHANNEL +/- buttons ( √ OPERATE ® ).
Digital-In
Use this button to directly select the
Press the
•
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive.
Volume +/–
Use these buttons to raise or lower the TV’s volume level.
49