Kramer Electronics user manual Overview, TP-551HDMI Line Transmitter features

Overview

3Overview

The Kramer TP-551and the TP-552constitute a high quality HDMI line transmitter / receiver system using two STP CAT 5e 24AWG cables1. The transmission range between the HDMI source and the HDMI acceptor can be extended to up to 60m (200ft)@1080i and 40m (130ft)@1080p.

This transmitter / receiver pair:

￿Supports up to 1.65Gbps bandwidth

￿Features enhanced EDID2 recall - the unit automatically stores and recalls EDID settings in non-volatile memory from the output3, allowing convenient and reliable connection to the source

￿Passes the HPD4 and CEC5 signals from the source to the display device using the CAT 5e cables

The TP-551HDMI Line Transmitter features:

￿An HDMI input and a pair of RJ-45 CAT 5 output connectors

￿Three status LEDs (input, output and power)

￿A high / low output gain selection button

The TP-552HDMI Line Receiver features:

￿An HDMI output and a pair of RJ-45 CAT5 input connectors

￿Three status LEDs (input, output and power)

￿Four EQ. levels to enhance performance

1 You can also use CAT 6 cables. Using UTP (Unshielded Twisted Pair) might reduce the system range 2 Extended Display Identification Data

3 If an output is not connected, the unit recalls the internal default EDID 4 Hot Plug Detect

5 Consumer Electronics Control

3