Kramer Electronics FC-14 user manual Converting an RGB Source

Page 6

Using Your RGBHV to Component Transcoder

5.1 Converting an RGB Source

You can convert an RGB signal to Y, B-Y, R-Y, via a FC-14RGBHV to Component Transcoder, as the example in Figure 2 illustrates, as follows:

1.Connect the RGB video camera to the R, G and B BNC inputs.

2.Connect the Y, B-Y, and R-Y outputs to the BETACAM VCR.

3.Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity.

4.Press the RGsB input format selector.

The camera’s RGB signal converts and outputs to the BETACAM VCR.

5.Switch on the power.

The Power switch illuminates.

Figure 2: Converting from an RGB Camera to a BETACAM VCR

4	KRAMER ELECTRONICS, LTD.

Image 6

Contents FC-14 USER MANUALModel RGBHV to Component TranscoderTables ContentsFigures Contents3 Overview 1 Introduction2 Getting Started FC-14 RGBHV to Component Transcoder4 Your RGBHV to Component Transcoder Feature 5 Using Your RGBHV to Component TranscoderUsing Your RGBHV to Component Transcoder POWER Switch5.1 Converting an RGB Source 5.2 Converting an RGBS Source Figure 3 Converting from an RGBS Workstation to a Plasma Monitor5.3 Converting an RGBHV Source 5.4 Converting a VGA Source Figure 5 Converting from a VGA Graphics Source to a Plasma Monitor6 Technical Specifications Table 3 includes the technical specificationsTechnical Specifications Only the first purchase customer may enforce this warranty Updates to this user manual may be found at E-mail info@kramerel.comP/N 2900-004017 REV