JVC TM-2000SU manual HOW to USE the Menu, Display and Selections in the SET-UP Menu Mode Setting

HOW TO USE THE MENU

FUNCTIONS (cont'd)

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

You can set the following set-up menu items.

H. POSITION	WHITE BALANCE	B.P.S. LEVEL
V. POSITION	CONTROL LOCK	REMOTE SELECT

Notes:

Parameters for H. POSITION and V. POSITION can be set separately depending on the video input (Input A (VIDEO), Input B (VIDEO) or Input B (Y/C)) selected by the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

WHITE BALANCE can be set individually at 6500 or 9300 for the color temperature value.

Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.

1. While pressing the MENU button, press the

PHASE ( ) button.

The <SET-UP MENU> screen is displayed.

PHASE MENU

2. Press the PHASE ( ) or CHROMA ( ) button to select the desired menu item.

	A selection mark (3) is put next to the selected item.
PHASE CHROMA	Front panel		Function	Contents
	button		displayed
H. POSITION	PHASE (	)	∞	Advance selection mark (3)
V. POSITION	CHROMA (	)	5	Reverse selection mark (3)
WHITE BALANCE

CONTROL LOCK

B.P.S. LEVEL

REMOTE SELECT

3. Press the VOLUME/SELECT button to set.

–		+	Front panel	Function	Contents
			button	displayed
	VOLUME/SELECT			+	Increase (to max. value)
			VOLUME/	3	Advance the setting value
			SELECT (+)	CUTO	Selects CUT OFF setting
				screen
			VOLUME/	–	Decrease (to min. value)
				2	Reverse the setting value
			SELECT (–)
				DRV	Selects DRIVE setting screen

Note:

For the WHITE BALANCE setting, select the CUT OFF or DRIVE setting screen, then select the buttons (PHASE/ CHROMA/BRIGHT) corresponding to the function indicated (R/G/B).

<SET-UP MENU> screen

1			<SET–UP MENU>
	‰	H. POSITION			:			00
		V. POSITION			:			00
		WHITE BALANCE
		CONTROL LOCK				: OFF
		B. P. S. LEVEL			:			10
2		REMOTE SELECT				:	OFF		3
				EXIT				4

– +

PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT

<Front panel button>

1Selection mark (3): Indicates the

menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the current settings (value).

4Function display: The functions of the front panel buttons (7 buttons on the left.) correspond to the function displayed.

Function	Contens
displayed
∞	Advance the menu item.
5	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
3	Advance the setting value.
2	Reverse the setting value.
EXIT	Exit the <SET-UP MENU>
	screen (release)
DRV	Selects DRV adjustment
CUTO	Selects CUT OFF
	adjustment
R	Adjusts red signal level
G	Adjusts green signal level
B	Adjusts blue signal level
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only in
	the DRIVE or CUT OFF
	adjustment mode.)

8