HOW to Handle Basic Operations, Picture Adjustment

HOW TO HANDLE BASIC OPERATIONS

BASIC OPERATION

1. Press the POWER switch to turn on the power.

	_ON : Power turns ON. (Power indicator: lit)
ON	—OFF :Power turns OFF. (Power indicator: unlit)
OFF	—OFF :Power turns OFF. (Power indicator: unlit)

POWER

2. Press the INPUT SELECT button to choose input.

Color system indication (PAL or NTSC)

NTSC

INPUTSELECT

Selects video/audio signals input to terminals on the rear panel.

INPUT	Terminals on the rear panel
SELECT
SELECT	Video signal input	Audio signal input
button	Video signal input	Audio signal input
1 Input A	VIDEO A terminal	AUDIO A terminal
(VIDEO)	VIDEO A terminal	AUDIO A terminal

2 Input B	VIDEO B terminal
(VIDEO)	VIDEO B terminal	AUDIO B terminal

3 Input B	VIDEO B (Y/C) terminal
3 Input B
(Y/C)
(Y/C)

With regard to Color system indication

With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the color system indication appears for about 3 seconds on the screen while PAL or NTSC signals are being detected.

It does not appear when receiving B/ W signal or when no signal is input. See page 7 for COLOR SYSTEM setting.

00 ~ 50

3.Press the VOLUME/SELECT button to adjust the speaker volume.

–		+	Press this button to display the speaker volume level on the
			screen.
	VOLUME/SELECT		+ : The Built-in speaker volume is increased. (00 = 50)
			+ : The Built-in speaker volume is increased. (00 = 50)

–:The Built-in speaker volume is decreased. (50 = 00) * Screen indication will disappear about 10 seconds after

operating.

PICTURE ADJUSTMENT

1. Press select button corresponding to the item you

want to adjust.	The item you select is displayed on the screen.
	1	PHASE (	) : Phase control
	2	CHROMA (	) : Chroma control

PHASE CHROMA	BRIGHT CONTRAST	3 BRIGHT ( ) : Brightness control
		4 CONTRAST ( ) : Contrast control
2. Adjust with the VOLUME/SELECT button.
–	+	Items	VOLUME/SELECT button
			–	+

VOLUME/SELECT		PHASE	reddish	greenish

		(Phase)

		CHROMA	lighter	deeper
		(Chroma)

		BRIGHT	darker	brighter
		(Brightness)

		CONTRAST	lower	higher
		(Contrast)

*Screen indication will disappear about 10 seconds after operating.

VOLUME : 20

–

–20 ~ +20

PHASE : 00

–

Notes:

Phase control is effective only in the NTSC color system mode.

Chroma control is not effective when receiving B/W or when no signal is input.

When the Chroma control is set to level " –20", the picture turns monochrome.

"NO EFFECT" is displayed (For about 3 seconds) when your selected

function has no effect.