Operation
Option Menu Options
Aspect Ratio Control
-Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis- played.
-Horizon aspect ratio is not available for Component
-
1.Press the RATIO button repeatedly to select the desired picture format. You can also adjust the Aspect Ratio in the OPTION menu.
•Set By Program
Selects the proper picture proportion to match the source’s image. (4:3 → 4:3, 16:9 → 16:9)
•4:3
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides.
•16:9
Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
•Horizon
Choose Horizon when you want to adjust the picture in a
•Zoom 1
Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.
•Zoom 2
Choose Zoom 2 when you want the picture to be altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage.
•Cinema Zoom
Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted.
You can adjust the enlarge proportion of Cinema Zoom using D / E button. The adjustment range is 1~16.
Cinema 3:2 Mode Setup
-Most movies are 24 frames/sec, but TV signal is 30 frames/sec. This option lets the TV do 3:2
1.Press the MENU button and then use D / E button to select the OPTION menu.
2.Press the G button and then use D / E button to select Cinema 3:2 Mode.
3.Press the G button and then use D / E button to select On or Off.
4.Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Note: This feature operates only in 480i mode.
Owner’s Manual 29