Important safeguards | Mitsumi electronic HC3200 manual

Important safeguards (continued)

WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the User Manual do not attempt to service this product by yourself. Please contact your dealer when you want to fix, adjust or inspect the projector.

Do not modify this equipment.

It can lead to fire or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged, unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the damaged projector.

Do not face the projection lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface. Place the projector on a leveled and stable surface only. Please do not place equipment on unstable surfaces.

Do not look into the lens when the projector is operating.

It may hurt your eyes. Never let children look into the lens when it is on.

Do not unplug the power cord during operation.

It can lead to lamp breakage, fire, electric shock or other trouble. It is best to wait for the fan to turn off before turning the main power off.

Do not touch the air outlet grille and bottom plate, which become hot.

Do not touch them or put other equipment close to the air outlet grilles because they become hot during operation. The heated air outlet grilles and bottom plate may cause injury or damage to other equipment.

Also, do not put the projector on a desk that is easily affected by heat.

Do not look into the air outlet grille when projector is operating.

Heat, dust, etc. may blow out of it and hurt your eyes.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector, causing deterioration in the projector quality and fire.

Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols near the projector. Flammable substances may ignite causing fire or breakdown because the temperature inside the projector rises very high while the lamp is illuminating.

Do not use the projector with condensation on it. It can lead to breakdown or other failure.

Place of installation

For safety’s sake, refrain from setting the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.

•Operating temperature: between +41°F (+5°C) and +95°F (+35°C)

•Operating humidity: between 30% and 90%

•Never put any heat-producing device under the projector so that the projector does not overheat.

•Do not install the projector to a place that is unstable or subjected to vibration.

•Do not install the projector near any equipment that produces a strong magnetic field.

Also refrain from installing the projector near any cable carrying a large amount of current.

•Place the projector on a solid, vibration free surface; otherwise it may fall, causing serious injury or damage.

•Do not stand the projector on its end. It may fall, causing serious injury or damage.

•Slanting the projector more than ±10°(right and left) or ±15°(front and rear) may cause trouble or explosion of the lamp.

•Do not place the projector near air-conditioning unit, heater, or humidifier to avoid hot or moist air to the exhaust and ventilation hole of the projector.

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced Radio/TV technician for help.

Changes or modifications not expressly approved by Mitsubishi could void the user’s authority to operate this equipment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class B digital apparatus complies with Canadian ICES-003.

EN-

HC3200 specifications

The Mitsumi HC3200 is a state-of-the-art electronic component that has gained recognition for its advanced features and robust performance in various applications. Designed for enhanced functionality and adaptability, this component is ideal for a range of electronic devices, including computers, automotive systems, and consumer electronics.

One of the key features of the HC3200 is its high-speed processing capability. It utilizes a powerful microcontroller that operates at impressive clock speeds, allowing for efficient data handling and rapid execution of commands. This high-performance architecture ensures that devices powered by the HC3200 can handle complex tasks without lag, making it suitable for applications that require real-time processing.

In terms of connectivity, the HC3200 offers multiple interfaces, including USB, UART, and I2C, facilitating seamless integration into various electronic systems. This versatility allows engineers and designers to utilize the HC3200 in diverse projects, supporting both wired and wireless communications, which are essential in today’s interconnected world.

Another significant advantage of the HC3200 is its low power consumption. Designed with energy efficiency in mind, this component allows devices to operate longer on battery power, making it ideal for portable applications. The innovative power management features also contribute to reducing heat generation, thereby enhancing the reliability and longevity of the devices it powers.

The Mitsumi HC3200 is equipped with robust security features that protect against unauthorized access and data breaches. With integrated encryption capabilities, it ensures that sensitive information is safeguarded in applications where security is paramount, such as in financial transactions or personal data management.

Moreover, the HC3200 supports a wide temperature range, making it suitable for use in harsh environmental conditions. This characteristic is particularly important for automotive and industrial applications, where components often face extreme temperatures and challenging conditions.

The Mitsumi HC3200 is also engineered for easy programming and scalability, allowing developers to easily update firmware and expand functionality as needed. This adaptability is crucial for businesses looking to future-proof their products in a rapidly changing technological landscape.

In conclusion, the Mitsumi HC3200 is a versatile and reliable electronic component that combines high processing speeds, extensive connectivity options, energy efficiency, and robust security features. Its ability to thrive in various environments and applications makes it an excellent choice for developers aiming to create cutting-edge electronic solutions.