Operation
Playing a DVD
PLAYBACK SETUP
1.Turn on the TV and select the video input source connected to the DVD/CD receiver.
2.Turn on the audio system (if applicable) and select the input source connected to the DVD/CD receiver.
3.Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the playback side down.
4.Press OPEN/CLOSE to close the tray. Playback starts automatically. If playback does not start, press PLAY.
In some cases, the disc menu might appear instead:
Use the b B v V buttons to select the title/chapter you want to view, then press ENTER to start. Press TITLE or MENU to return to the menu screen.
Use the 1 2 3 4 buttons to select an option you want, then press ENTER to view the option.
Notes:
•If parental control is set and the disc is not within the rating settings you must input the password. (See “Lock Menu” on page 21).
•DVDs may have a region code. Your receiver does not play discs that have a region code different from your receiver. The region code for this receiver is 1 (one).
General Features
Note:
•Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.
MOVING TO ANOTHER TITLE/GROUP
When a disc has more than one title/group, you can move to another title/group. Press DISPLAY while playback is stopped then the appropriate number
You can play any title by inputting its number while playback is stopped.
MOVING TO ANOTHER CHAPTER/TRACK
When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:
•Press SKIP . or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track.
•Press SKIP . twice briefly to step back to the previous chapter/track.
•To go directly to any chapter during DVD playback, press DISPLAY and press v / V to select the chapter/track icon. Then, input the chapter/track number or use b / B.
SEARCH
1.Press and hold SKIP/SCAN . or > for about two seconds during playback.
The receiver will now go into SEARCH mode.
2.Press and hold SKIP/SCAN . or > repeatedly to select the required speed: X2, X4, X16 or X100
3.To exit SEARCH mode, press PLAY.
Note:
•When using a DVD audio disc that includes pictures, this operation may be permitted in some picture segments.
Operation
23