Hyundai H-CMD7080 instruction manual Func button, LOC button, Auto memory store, Preset scan

-Select a band (if needed)

-Select a station by pressing T-DN/T-UP buttons on the panel or PREVIOUS/NEXT buttons on the RC.

-Hold a Preset button (1-6), which you want store the station for at least 2 seconds.

￿￿To recall a station:

-Select a band (if needed)

-Press a Preset button (1-6) briefly to recall the stored station.

FUNC button

Press FUNC button to enable AF mode. Press and hold to choose MONO or STEREO.

LOC button

In urban settings, most stations are strong enough and stations are usually listened in LOCAL mode. However, if a station seems too distant to be received well, try switching to distant mode. Choose local reception by pressing LOC button.

Auto memory store

Select a band. Press AS/PS button on the panel and hold for 2 seconds to enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto store, press any button except PWR.

Preset scan

Select a band. Press AS/PS button on the panel or P.SCAN button on the RC to scan all preset stations in the memories of the current band. To stop preset scan, press the button again.

TA (Traffic Announcement) function

1.Press TA/DSP button shortly to turn on or turn off the TA function.

2.Press and hold for 2 seconds SEL button on the panel, press it shortly and repeatedly to select TA function.

Rotate VOL knob to select TA SEEK or TA ALARM mode. 18