Hyundai H-CMD7080 Dual Mono setup, Dynamic setup, Lpcm Output setup, Parental setup Change setup

Press DOWN arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to “STEREO”. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect), select ”LT/RT”

￿￿Dual Mono setup

Select the type of output of the Left and Right audio output connectors. Stereo is normal Stereo, L-Mono is all sound on the Left Audio output, R-Mono is all sound on the Right channel. The “Mix-Mono” function only works when a DVD is being played in DTS 5.1 mode.

￿￿Dynamic setup

This function is to adjust the linear compression rate to obtain the different compression results of the signals. Standard set to “OFF”

￿￿LPCM Output setup

If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust LPCM OUTPUT.

Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. 48KHZ -> Playback a disc recorded at the sampling rate of 48kHz.

96KHZ -> Playback a disc recorded at the sampling rate of 96kHz.

Parental setup:

￿￿Change setup

With this option you can change your password protection. The default password is 0000

￿￿Parent setup

For DVD discs, which support this system, parents can prohibit watching content that might be inadvisable for children (use LEFT/RIGHT cursor buttons to choose rating code, then enter password to confirm).

￿￿Default setup

31