LG Electronics OSW100 install manual Important Safety Instructions

Page 3

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions. Keep these instructions.

Heed all warnings. Follow all instructions.

Warning

This wall mount should be installed by a trained

Do not install the product where the weight

and experienced installer designated by the

cannot be supported.

retailer.

If the strength of the location where the wall

Having the product installed by a non-

mount is installed is not strong enough, it can

specialized installer is very dangerous and can

fall off and cause an injury.

cause damage or injury.

 

Use a trained and experienced installer to

After installing the wall mount, do not hang

move or replace the wall mount, if needed.

on the product or apply severe impact to the

Installation requires special techniques. Moving

product.

or installing the product on your own can cause

The product can fall off and cause injury.

serious safety issues.

 

When installing the wall mount, never hang the

 

power or signal cable on the rear side the TV.

 

The cord can be damaged and cause a fire, an

 

electric shock, or damage to the product.

 

Caution

Install the product according to the

When installing the product or adjusting the

directions in the user manual.

height of the product after installing, always

If the product is not installed based on the

do so with 2 people.

directions in the user manual, it can cause a

Working alone can cause the product to fall off

serious injury or damage to the product.

and result in injury or damage to the product.

During the installation, check the type of wall

When drilling holes in the wall, always use a

material and use the sealed anchor and

drill bit and drill of designated diameter. Also

screw if the conditions comply.

follow the designated directions for the

If you do not use the designated anchor or

depth of the hole.

screw, the mount may not be able to withstand

If the product is installed without following the

the weight of the product and cause a safety

designated method, the product may be

issue.

unstable and cause a safety issue.

Do not wipe the product with a wet towel and

 

do not use any heater or humidifier below

Do not install the product near any object

where the product is installed.

that may cause vibration.

If water flows into the product or if moisture and

Do not install the product near any high

heat are applied to the product, it can cause a

voltage power cable or power source.

fire, an electric shock, or problem to the product.

 

Unplug the power cord from the power outlet

Do not install the product with bare hands.

before installing the product.

Always wear proper work gloves.

If you install the product with the power cord

It can cause an injury.

plugged, it can cause an electric shock or a fire.

 

Do not allow the video connectors connected

 

to the display to press against the wall. Use

 

the included right-angle adapters if needed.

 

Only use attachments/accessories specified by

 

the manufacturer.

3

ENGLISH

Image 3
Contents Wall Mounting Bracket Component Important Safety Instructions Before Installation Installation MethodHow to Attach the Spacers to the Hanger Position How to Attach the Brackets for the Product to the TVHow to Install the Top Wall Mount How to attach to masonry walls76 mm →→Check if the wall mount is level by using a levelerUnit mm How to Attach the Top Wall Mount to the Product How to Install the Top Wall Mount Fixing Pin How to Adjust the Level of the ProductHow to Tidy Up Cables Unit mm Product SpecificationTop Assembly Lower Assembly