LG Electronics ZDX-313 warranty Optional TV Connections, Audio Connection for DVD

Page 12

RF coaxial connection

Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R).

Optional TV Connections

These connections support only DVD playback. The tuner and VCR still output through the RF.OUT (R) or DVD/VCR OUT (A, V) jacks.

How to set the DVD+VCR’s RF output channel

1.When the DVD+VCR is turned off, press and hold CH (V/v) on the front panel for more than five seconds. “RF03” or “RF04” appears in the display window.

2.Press CH (V/v) to change the RF output channel (RF03 or RF04). Tune the TV to this channel.

3.Turn off the DVD+VCR.

Audio/Video connection

1.Connect the DVD/VCR VIDEO OUT jack on the DVD+VCR to the video in jack on the TV using the video cable supplied (V).

2.Connect the Left and Right DVD/VCR AUDIO OUT jacks on the DVD+VCR to the audio left/right in jacks on the TV (A1) using the supplied audio cables.

Note:

If you use this connection, set the TV’s source selector to

VIDEO.

Component Video / Progressive Scan connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD+VCR’s progressive scan output for the highest video resolution possible.

1.Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD+VCR to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).

2.Connect the Left and Right AUDIO OUT jacks of the DVD+VCR to the audio left/right in jacks on the TV (A2) using the supplied audio cables.

Notes:

•When you use Component Video signal, set the Progressive Scan to “Off” on the setup menu.

•Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack).

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled.

Audio Connection for DVD

You can only listen to DVD playback using COAXIAL

(X)and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 11.)

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic

Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A1, A2) supplied.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Installation and Operating Guide Warranty Serial Number Important Safety Instructions Contents About the Symbol Display Symbols Used in this ManualMoisture Condensation Types of Playable Discs Disc-related termsMP3 WMAAbout the Remote Control Battery installationRegional Code Selecting the Viewing SourceFront Panel Lock functionREC Remote Control Backward / Forward m / MRear Panel DVD OUTConnecting an Antenna or Cable TV Basic TV ConnectionsAntenna Cable TVOptional TV Connections Audio Connection for DVDAccessory Audio/Video A/V Connections to Digital Multi-channel soundRear of DVD+VCR Amplifier ReceiverInitial Settings VCR General OperationAuto Clock Set Manual Clock SetAuto Channel Programming To Add or Erase ChannelsInitial Settings DVD Menu LanguageDisc Audio / Subtitle / Menu DVD Display Mode DVD TV Aspect DVDProgressive Scan DVD To turn on progressive scanDolby Digital / DTS / Mpeg DVD Sample Freq. Frequency DVDDRC Dynamic Range Control DVD Auto Play DVDPassword Security Code Lock Parental ControlRating DVD Area Code DVDVCR Tape Playback VHS Hi-Fi Stereo / MTS Broadcast Slow MotionCM Skip Commercial Skip Hi-Fi Stereo Audio SoundVCR Tape Recording To record one TV program while watching anotherTo pause the recording Checking or Erasing the Timer Program Program PriorityChecking the Recording Time Extending the Recording TimeOn-Screen Display VCR Copying from DVD to VCRAdditional VCR Information VCR Auto Play SystemVHS Quasi Playback Sqpb Easy InformationPlayback Setup General FeaturesPlaying a DVD Search DVD Time Search DVDMarker Search DVD Repeat DVDSpecial DVD Features Maintenance and Service On-Screen Display DVDExample On-Screen Display during playing DVD Video Items Playing an Audio CD or MP3/WMA Disc Audio CDPlay or Enter and playback starts MP3 / WMAAudio CD and MP3 / WMA Disc Features Moving to another TrackRepeat Track / All / Off CD MP3 WMA Search CD MP3Programmed Playback Repeat Programmed TracksErasing a Track from Program List Erasing the Complete Program ListViewing a Jpeg Disc Controlling Your TV with the Supplied Remote Controlling other TVs with the remoteCode numbers of controllable TVs TV Control Buttons By pressing You canLanguage Codes Choose a area code from this listTroubleshooting Symptom Cause CorrectionSecurely Power of the equipment connected Progressive scan mode More than 5 secondsSymptom Cause Correction Specifications VCR SpecificationsDVD Specifications GeneralWarranty Period HOW Service is Handled For Warranty ServiceCustomer INTER-ACTIVE Center Numbers
Top Page Image Contents