3M SCP725 manual Operating Instructions, Projector Start Up, Stand By Mode

Page 21

3M™ Super Close Projection System SCP725

Operator’s Guide

 

 

 

Operating Instructions

Projector Start Up

Read the Important Safeguards before operating the SCP725. After all cable connections have been completed, refer to Setup and Configuration, the projector can be powered up.

For best results, please observe the following start up sequence.

1.Power ON all of the connected equipment.

2.Plug the supplied power cord into the AC inlet of the projector.

3.Press the On/Standby button on the projector or remote control. The lamp will turn on and an image will appear and grow brighter on the screen.

4.If the security feature is activated, enter the 4-digit PIN code.

a. Press the left/right arrow to move the cursor through each PIN field.

 

 

 

 

 

 

 

 

 

 

 

PIN Code

b. Press the up/down arrows to change the value in each field.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

c. Press the Trigger button on the remote to enter the PIN access code.

5.Check all ventilation slots and clear away any obstructions.

6.Extend or retract front adjustment foot to obtain best image height.

Note: Rotate foot for fine adjustment.

ENGLISH

7.Turn the focus adjustment (top of projector) to obtain the best image sharpness.

Stand By Mode

When an image is not being projected, place the unit into standby mode.

1.Press the On/Standby button on the Remote Control or the On/Off button on the I/O Box. When the message “Press the power button to turn the unit off” displays, press the On/Standby button again.

2.The lamp will switch off and the power button will first turn red indicating the unit is in lockout and then after 90 seconds the button turns amber to indicate the unit is in standby mode.

Note: In standby mode, the cooling fans will continue to run for 5 minutes and then turn off.

© 3M 2011. All Rights Reserved.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Super Close Projection System SCP725 Page Contents Troubleshooting Machine Specifications MaintenanceReplacement Parts and Accessories Menu NavigationIntroduction Warranty Limited Remedy Limited LiabilityThank You for Choosing 3M Equipment TrademarksHumidity What 3M Will Do To Correct Problems Product PatentsRegulatory Notices CE Statement Intended Use Safety InformationTo reduce the risk associated with choking To reduce the risk associated with intense visible light Safety Labels Contents of Shipping Box Machine Characteristics DimensionsProduct Description Vertical Lens Shift Projector Distance from Screen and Image SizeParts Identification Projector Terminal ConnectionsProjector Panel Function Top Terminal Panel on I/O Module Module Control Panel optional accessoryModule Control Panel Function Top Terminal Panel FunctionBottom Terminal Panel Function Bottom Terminal Panel on I/O ModuleRemote Control Functions Setup and System Configuration Stand By Mode Operating InstructionsProjector Start Up Menu Navigation Main MenuMenu Icon Menu Description Input Menu Feature DescriptionPicture Picture MenuAdvanced Picture Menu Audio Menu DefaultEnglish Setup MenuAdvanced Setup Menu Feature Description Range Default3M 2011. All Rights Reserved Information Menu Specification Machine SpecificationsLamp Replacement MaintenanceCleaning the Air Vents Cleaning the Lamp Module and Lamp Compartment English Identifying an Expired Lamp Module TroubleshootingLamp Module Parts Visible Indications of an Expired LampProjector Troubleshooting Module TroubleshootingSymptom Possible Cause Solution Symptom Standby Button State Possible Cause ActionEnglish English Module Indicator Lights Projector Indicator LightsMode Indicator Signal on Projector Mode Indicator Signals on I/O Model BoxReplacement Parts Replacement Parts and AccessoriesOptional Accessories not shown Name of PartEnglish English English Important Notice

SCP725 specifications

3M SCP725 is a cutting-edge product that exemplifies advanced technology in the world of adhesive bonding solutions. Designed for a diverse range of applications, SCP725 is particularly well-suited for industries such as automotive, electronics, and construction. The product stands out due to its unique formulation that combines versatility, durability, and ease of use.

One of the main features of 3M SCP725 is its exceptional adhesion capabilities. It provides a strong bond between a variety of substrates including metals, plastics, and composites. This multi-surface adhesion is crucial for industries that require reliable performance across different materials. Users can rely on SCP725 for both structural and non-structural bonding applications, which makes it an invaluable tool for engineers and manufacturers alike.

Another significant technology integrated into SCP725 is its rapid curing time. This feature not only enhances productivity but also minimizes downtime in production environments. The quick-drying formulation allows for immediate handling, which is essential for fast-paced manufacturing processes. As a result, companies can streamline their operations and reduce overall project timelines without compromising on bond quality.

3M SCP725 is also characterized by its resistance to environmental factors. The adhesive offers excellent performance under varying temperatures and humidity levels, making it suitable for both indoor and outdoor applications. This durability ensures that bonds remain intact and effective over time, even in challenging conditions. In addition, the formulation is designed to resist chemicals and solvents, providing peace of mind for applications in harsh environments.

Another noteworthy characteristic of SCP725 is its ease of application. The product is available in convenient packaging that allows for precise dispensing, minimizing waste and ensuring that users can apply the adhesive exactly where needed. Furthermore, its user-friendly nature means that training requirements are reduced, facilitating seamless integration into existing workflows.

In summary, 3M SCP725 is a versatile, rapid-curing adhesive that provides strong bonding across various surfaces, excels in adverse environmental conditions, and is simple to apply. Whether in the automotive sector or electronic manufacturing, SCP725 is poised to meet the adhesive bonding needs of modern industries with reliability and efficiency.
Top Page Image Contents