TacT Audio S2150, M2150 owner manual Maxlev Dthr, +12.0

Page 22

Front Panel Display

OPT menu

The options menu is designed to control the systems maximum signal level

(Options)

“MAXLEV”, signal detection threshold “DTHR” and wheel speed “WH”.

NOTE: Wheel speed is only available on the M2150.

Options Menu :

 

MAXLEV

DTHR

WH

 

 

 

 

 

5

+12.0

 

-6.0 dB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

2

 

3

1

 

- Maximum Level setting.

2

 

- Detection setting.

 

 

3

 

- Wheel speed setting.

 

 

-Max Level controls the system’s maximum signal level.

For example: if this option is set to -3.0 dB, the volume control and output can not go above -3.0 dB.

-Detection sets the signal detection threshold. If the absolute value of the Left or the Right channel signal goes above this threshold the red signaling dot will be displayed on the front panel bellow the master volume display. This feature can be used to indicate signal presence on either channel or to indicate near clipping condition. To use it as signal presence indicator set Detec- tion to a value close to -90.0 dB. To use it as near clipping indicator set Detection to a value close to 0.0 dB.

-Wheel option sets the wheel sensitivity. The maximum speed is 10 and minimum speed is 1. For example if the speed is set to 1, the volume increase is slower than if set to 10. To turn the wheel off, set the speed setting to “OFF”. This setting is located one step below “1” the minimum speed.

To select/highlight an option use the “LEFT” or “RIGHT” buttons. To modify a se- lected option use the “UP” and “DOWN” buttons.

22 Tact Audio

Page 21 Page 23
Image 22
Page 21 Page 23
Contents M2150 / S2150 Blank Tact Audio Page Acknowledgments RegistrationTable of contents Accessories Operating voltage Unpacking the M/SIntroduction Digital input Analog input optional ADC module 2150 ConnectionsDigital Input Section Computer 2150 Connections Digital outputSampling frequency of the input Use the AUX port to connect to TacT digital amplifiersDigital Output Speaker output Normal operationBiamped operation 2150 Connections Speaker outputHorizontal Biamping 2150 Connections Vertical Biamping 2150 Connections Biamping ConfigurationsExamples of how a TacT active system can be configured M2150 & S2150Front Panel Controls Remote Control Correction block Volume BlockMenu Main screen Main menu Saving Menu Settings Tact Audio Front Panel DisplayFront Panel Display Delay menu Level menuLOW High LOWCRO menu Displ menu OFF onTrig menu DisplayMaxlev Dthr +12.0Left Right Output SourceLected option use the UP and Down buttons Baud Rate Current Address Lock menuGain 12 dB Gain menu Tact AudioTacT M/S2150 Software RS232 connection at this time Connect yourS2150 to your Being used by any other devicesSpecifications TacT Audio, Inc

M2150, S2150 specifications

TacT Audio is a prominent player in the high-fidelity audio equipment market, known for its innovative digital amplification technologies. Among its flagship products are the S2150 and M2150 amplifiers, both of which embody the brand's commitment to superior sound quality and cutting-edge design.

The TacT Audio S2150 is a stereo amplifier that exemplifies the company's philosophy of delivering high-performance audio reproduction. With its Class D amplification technology, the S2150 offers exceptional efficiency and low heat generation, making it suitable for long listening sessions without the risk of overheating. It boasts an output power of 150 watts per channel into 8 ohms, delivering dynamic and powerful sound that can drive a wide range of loudspeakers effectively.

One of the standout features of the S2150 is its built-in digital signal processing (DSP) capabilities. This allows for precise room correction, enabling users to optimize their listening environment for the best possible audio experience. The user-friendly interface makes it easy to adjust settings for different room acoustics, ensuring that music is reproduced with clarity and precision.

The M2150, on the other hand, is designed for those seeking a more streamlined, multi-channel solution. It offers all the advantages of the S2150 but expands the capability to serve multiple speakers in a home theater setup. It maintains the same high-quality Class D technology, providing 150 watts of power per channel across a wider range of configurations. The M2150 is ideal for audiophiles looking to build immersive audio environments, integrating seamlessly with modern home theater systems.

Both the S2150 and M2150 are equipped with advanced connectivity options, including digital inputs like USB, coaxial, and optical. This versatility ensures that they can be easily integrated into any audio setup, whether connecting to a computer for high-resolution music playback or linking to a digital audio source for simple streaming.

Another noteworthy characteristic of TacT Audio’s amplifiers is their robust build quality and sleek design. The combination of aesthetic appeal and durability ensures that both models not only perform exceptionally well but also enhance the visual aspect of any audio system.

In summary, the TacT Audio S2150 and M2150 amplifiers highlight the brand's dedication to high-fidelity audio through advanced technologies and user-friendly features. With their powerful output, DSP capabilities, and versatile connectivity options, these amplifiers represent a significant investment for anyone serious about achieving the highest quality sound in their home audio experience.
Top Page Image Contents