LG Electronics LSW200BG, LSW200BX, LSW400BG Before installation, It can cause an injury

Page 3

Caution

ENGLISH

Install the product according to the directions in the user manual.

If the product is not installed based on the directions in the user manual, it can cause a serious injury or damage to the product.

During the installation, check the type of wall material and use the sealed anchor and screw if the conditions comply.

If you do not use the designated anchor or screw, the mount may not be able to withstand the weight of the product and cause a safety issue.

Do not wipe the product with a wet towel and do not use any heater or humidifier below where the product is installed.

If water flows into the product or if moisture and heat are applied to the product, it can cause a fire, an electric shock or problem to the product.

When installing the product or adjusting the height of the product after installing, always do so with 2 people.

Working alone can cause the product to fall off and result in injury or damage to the product.

When drilling holes in the wall, always use a drill bit and drill of designated diameter. Also follow the designated directions for the depth of the hole.

If the product is installed without following the designated method, the product may be unstable and cause a safety issue.

Do not install the product near any object that may cause vibration.

Do not install the product near any high voltage power cable or power source.

Unplug the power cord from the power outlet before installing the product.

If you install the product with the power cord plugged, it can cause an electric shock or a fire.

Do not allow the video connectors connected to the display to press against the wall. Use the included right-angle adapters if needed.

Only use attachments/accessories specified by the manufacturer.

Do not install the product with bare hands. Always wear proper work gloves.

It can cause an injury.

Before installation

*Do not use the product for purposes other than mounting a display on the wall.

*When installing/using the wall mount, be cautious of product damage and avoid accidents.

*If you have not fully read and understood the installation manual, do not install the product and contact the dealer to have a specialized installer install the product for you.

*Even if you are not a specialized installer, it is advantageous to have experience in mechanical or construction field in completely understanding this manual and installing the product.

*This product is designed to be mounted to walls that use standard intervals between the studs.

*Install the screw to attach the wall mount so that it can be assembled at the center from both ends of the studs.

Use of stud finder, a separate device, is recommended.

*Install the product only on a vertical wall.

The manufacturer is not responsible for issue from installing the product on severely wall or on the ceiling.

*Keep the included accessories out of reach of babies or children as it can cause safety issues including suffocation from swallowing the parts.

*Make sure screws are tight against the wall, but do not overtighten.

*Be careful not to install a TV that exceeds the weight restrictions of the wall mount.

*Be careful with the tools used during installation to prevent accidents or damage.

3

Image 3
Contents Wall Mounting Bracket LSW400B/LSW400BG Component cable with angled connectors Hdmi angle adapterComponent UnitsIt can cause an injury Before installationPlease follow the below direction Installation methodHow to attach to masonry walls Fixating the mounting bracket on the TV→ LSW200B/LSW200BG/LSW200BX/LSW200BXG When mounting to wooden studsHow to assemble the wall mount support and display Always install the display with 2 or more peopleLSW400B/LSW400BG Product specificationHow to level the Display Cable arrangement and set protection cushionLSW400B/LSW400BG LSW200B/LSW200BG/LSW200BX/LSW200BXGModel Serial
Related manuals
Manual 289 pages 21.66 Kb