DP
Step Five
INSTALLING THE FUEL LINES
Installing The Stand Pipe
1.Locate hole in an area where the fuel pickup is kept safe (the center of the tank is recommended).
2.Tighten hose clamps.
3.Secure the fuel lines to reduce movement.
Drill 1” Hole Using Unibit or Hole Saw
Fuel Line
Tighten Until | Nut | |
Washer | ||
Secure | ||
Gasket | ||
|
Tank
Flange
Cut Tube
Bottom 45°
Supply 5/16” ID
Return 3/16” ID
12” Min Between
Supply And Return
Back View Of APU
No Kinks Or Abrasion Points
Gas Tank | Allow 1” To 2” Min. |
| Space To Bottom Of Tank |
|
|
WARNING: Exercise safety measures when working near flammable fuel.
CAUTION: Keep fuel lines safe from wear points.
CAUTION: Keep fuel lines away from exhaust pipes and heated moving parts. 
CAUTION: The standpipe must enter the tank from the top and not the side.
