DP
READ BEFORE STARTING INSTALLATION
Each truck chassis is built differently and will require a different installation method.
Step One
Review the placement of ALL parts and components before beginning the installation process.
DCP (Driver Control Panel)
HVAC
CONDENSER
APU
Driver Control Panel
Condenser
120 VAC Receptacle Panel
HVAC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
APU |
|
| Fuel Supply | ||||||
|
| And Return | |||||||
|
|
|
|
| |||||
Vehicle Fuel Tank
APU Parts and Components |
| Battery Terminal Kit | 1 | |
Parts List: |
| Red heat shrink | 1 | |
APU | 1 | Black heat shrink | 1 | |
Ring terminals | 2 | |||
APU Installation Kit | 1 | |||
Cable ties | 75 | |||
Frame locks | 4 | |||
_” x 6 _” Bolts | 4 | Condenser | 1 | |
_” Split Lock Washers | 8 | |||
Hoses | 2 | |||
_” lock nuts | 4 | |||
Mounting hardware | 1 | |||
Frame Washers | 2 | |||
Harness | 1 | |||
Fuel | 1 | |||
HVAC | 1 | |||
1 | ||||
Driver Control Panel | 1 | |||
Clamps | 2 | |||
Power Outlet | 1 | |||
Exhaust Extension Kit | 1 | |||
|
| |||
90 Degree exhaust pipe | 1 |
|
| |
Support bracket | 1 |
|
| |
Exhaust clamps | 2 |
|
| |
5/16” NC bolt | 1 |
|
| |
5/16” Washers | 2 |
|
| |
5/16” Lock Nuts | 2 |
|
|
Parts and Tools Required
•Radiator hose – 3/4”
•Radiator shut off valves
•Radiator hose clamps
•An assortment of nuts, bolts, and washers as required
•An assortment of electrical connectors and protective conduit as required
•Heat shrink, pipe sealant, never seize, electrical tape, expanding foam
•Torque wrench (100ft/lb)
•Hole saw kit (1”,1 _”, 3”, 3 _”, 4 _”)
•Portable lighting
•Hand forklift/lifting device
•Step drill
•Angle drill
•Reciprocating saw
•Nutsert ® installation tool
•Scale (refrigerant) accurate to ounces
•Gauges (refrigerant) 134A compatible
•Diamond Test Switch Module PG1008
•Flow Meter TK 9002
NOTE: The APU requires periodic maintenance. Ensure you have access to internal components (i.e. oil filter, air filter,
fuel filter and oil filter). The Diamond comes filled with long life coolant. Consult the truck owner prior to altering the vehicle in any way.
CAUTION: Trucks with longer chassis should have the APU mounted closer to the sleeper unit to avoid obstacles such as railway crossings, speed bumps, curbs, etc. Before beginning installation of the Diamond system, disconnect the vehicle’s batteries. If truck is equipped with a coolant valve, valve must be fully opened before starting APU.
