LG Electronics 29FS2AMB/ANX-ZE service manual Adjustment Instructions, Application Object, Notes

Page 8
ADJUSTMENT INSTRUCTIONS

ADJUSTMENT INSTRUCTIONS

1. Application Object

These instructions are applied to all of the color TV, MC-05HA chassis.

2.Notes

(1)Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument.

(2)Adjustment must be done in the correct order.But the adjustment can be changed by consideration of mass production.

(3)The adjustment must be performed in the circumstance of 25±5°C of temperature and 65±10% of relative humidity if there is no specific designation.

(4)The input AC voltage of the receiver must keep rating voltage in adjusting.

(5)The receiver must be operated for about 15 minutes prior to the adjustment.

3.Soft ware download

1)Connect JIG to P004 of Digital Board.

2)Connect SCL line of JIG Switch to Ground.

3)Turn on JIG and supply 6V to Digital Board. Terminate the SCL of clause 2) by using Switch.

4)After termination of SCL line, wait for 3 second.

5)Execute ‘vct69xyp_main_graphic.vi2c’ program.

6)Click the TVT button.

8) After checking ‘40’, Click the Erase Flash button.

9) Double click ‘Edit Window’.

10) Click the file select button of Name to select file.

7) Double click right check box of ‘Boot loader Version‘ line, and

11) Select necessary file.

 

then check to change to 40 from 0.

 

 

 

 

 

 

 

 

 

- 8 -

Image 8
Contents CHASSIS MC-05HA COLOR TV SERVICE MANUALREAD THE SAFETY PRECAUTIONS IN THIS MANUAL MODEL 29FS2AMB/ANXCONTENTS SAFETY PRECAUTIONS IMPORTANT SAFETY NOTICEGeneral Guidance X-RAY RadiationCONTROL DESCRIPTIONS recalls your preferred picture settingsets the sleep timer switches the sound on or off14. MENU Front panel 1. MAIN POWER ON/OFF switches the set on or off2. POWER/STANDBY INDICATOR adjusts picture according to the surrounding conditionsSPECIFICATIONS A General SpecificationsA Scope A Test and Inspection MethodADJUSTMENT INSTRUCTIONS 1. Application Object2. Notes 3. Soft ware download7. Purity & Convergence adjustment 4. DVCO Adjustment6. Focus Adjustment 6-2. Adjustment8. Screen voltage Adjustment 9. White balance Adjustment8-2. Adjustment 9-3. AdjustmentPage 10-1. Preliminary steps 10. Deflection Data Adjustment10-2. Adjustment 11. Deflection setting initial data 13. OPTION setting13-2. Adjustment Method 13-2. Preliminary stepsTable 1 OPTION Table 2 OPTIONCaption HDEV2 2 SCARTSC ID enable + SCRGBsoft mix+sav2 Table 3 OPTIONTable 4 OPTION OPTION14. SERVICE MODE DATA 32 INCHTROUBLE SHOOTING 1. No Picture sound ok2. No Sound picture ok AV1, 2, 3, Component 1 INPUT4. No power 3. No PIPAV1, 2 SCART5. No raster PRINTED CIRCUIT BOARD MAINDIGITAL TOP STAND-BYHARMONICS DIGITAL BOTTOMSIDE-A/V POWER S/W LED + PRE-AMP CONTROLBLOCK DIAGRAM 1. MAIN2. VCT-PVideo 3. VCT-PAudio MEMO EXPLODED VIEW 943 400 913112 503 520 560 580DESCRIPTIONS EXPLODED VIEW PARTS LISTLOCA. NO DIODE REPLACEMENT PARTS LISTTRANSISTOR CAPACITOR DESCRIPTION CONNECTOR COIL & INDUCTORRESISTOR SWITCH ACCESSORIES FILTER & CRYSTALJACK MISCELLANEOUSP/No 38549D0023A-1/2 2006.01.20P/No 38549D0023A-2/2 SVC. SHEET 38549D0023A-S P/NO 38289S0046B Printed in Korea