2
12 Connecting
Connecting to an | sampling frequency, set the [Sample Freq.] | |
Amplifier | yy If your TV is not capable of handling 96 kHz | |
option to [48 kHz] on the setup menu. | ||
| ||
| yy If your TV is not equipped with Dolby Digital | |
| and MPEG decoder, set the [Dolby Digital] and | |
Connecting Audio cable | [MPEG] options to [PCM] on the setup menu. | |
yy Changing the resolution when the unit is | ||
Connect the AUDIO OUTPUT on the unit to 2CH | ||
connected with HDMI connector may result in | ||
AUDIO IN on amplifier with Audio cable, such as | malfunctions. To solve the problem, turn off the | |
AUDIO Left/Right with white/red. | unit and then turn it on again. |
Connecting
Rear of the Unit
Audio
Cable
Receiver /
Amplifier
,,Note
yy If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all.
yy To see the audio format of the current disc in the
yy This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs.
Connecting COAXIAL or OPTICAL (digital audio) cable
Connect one of the unit’s DIGITAL AUDIO OUTPUT (COAXIAL or OPTICAL) jacks to the corresponding jack on your amplifier.
Rear of the Unit | Coaxial |
|
|
| |
| Cable | optische |
| OR | |
|
| kabel |
|
| Receiver / |
|
| Amplifier |
Connecting HDMI cable
Connect the HDMI OUTPUT on the unit to the HDMI IN on amplifier with HDMI cable.
(Type A, High Speed HDMI™ Cable)
Connect the HDMI OUT jack on amplifier to HDMI IN jack on TV with HDMI cable, if the amplifier has HDMI OUTPUT jack.
Rear of the Unit
HDMI
Cable
TV
COAXIAL
|
| HDMI |
| Receiver / |
|
|
| Amplifier | |
OPTICAL |
| Cable |
| |
|
|
|