Adjust the Setup Settings

System Setting 13

Settings

When the unit is turned-on at the first time, you have to select the desired language.

You can change the settings of the unit in the [Setup] menu.

1.Press SETUP.

2.Use w/sto select the first setup option, and press dto move to the second level.

3.Use w/sto select a second setup option, and press dto move to the third level.

4.Use w/sto select a desired setting, and press ENTER (b) to confirm your selection.

[LANGUAGE] Menu

Menu Language

Select a language for the Setup menu and on- screen display.

Disc Audio/Subtitle/Menu

Select a language for the Disc Audio/Subtitle/ Menu.

[Original]: Refers to the original language in which the disc was recorded.

[Other]: To select another language, press number buttons then ENTER (b) to enter the corresponding 4-digit number according to the language code list. (See page 21) If you make a mistake while entering number, press CLEAR to delete numbers then correct it.

[Off] (for Disc Subtitle): Turn off Subtitle.

[DISPLAY] Menu

TV Aspect

Select which screen aspect to use based on the shape of your TV screen.

[4:3]: Select when a standard 4:3 TV is connected.

[16:9]: Select when a 16:9 wide TV is connected.

Display Mode

If you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen.

[Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen.

[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.

TV Output Select

Select an option according to the TV connection type.

[RGB]: When your TV is connected with the TO TV (SCART) jack.

[YPbPr]: When your TV is connected with the

COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit.

System Setting