PAGE 40
INITIAL SETTINGS
SelectingSpeaker
Select the speaker to adjust the audio output | 1 | |
mode of the speaker. | ||
|
At the SETUP screen, press D/E to select “5.1 Speaker Setup” and press G.
STOP
Disc Audio
1, 2 | PAUSE | SELECT |
| Disc Subtitle | R |
| R |
/STEP | /ENTER |
| Disc Menu |
|
|
| |
|
|
|
|
| |||
|
| OPEN/CLOSE |
|
|
| ||
SETUP |
| Rating | Front L/R |
| |||
|
|
| 1, 2 |
| |||
|
|
| Password | Volume: | dB | ||
| GUI DISPLAY |
| TV Aspect | Size | : | Large | |
|
|
|
| Menu Language | Delay | : | ms |
|
|
| RETURN | TV Output Select | Test |
|
|
| 1 | 2 | 3 |
|
| ||
| Pseudo PAL | Return |
|
| |||
|
|
|
|
|
| ||
|
|
| 3D SOUND | Digital Audio Output |
|
|
|
| 4 | 5 | 6 |
|
|
| |
| 5.1 Speaker Setup |
|
|
| |||
|
|
| PROGRAM |
|
|
| |
|
|
|
|
|
|
|
Front Speaker (L/R)
Centre Speaker Sub Woofer
Rear Surround
Speaker (L/R)
7 8 9
CLEAR | TITLE | MENU |
0
2 |
Press F/G to select the desired speaker and
press D/E/F/G to adjust options.
Note
❍Do not place the centre or rear speakers farther away from the listening position than the front speakers.
❍The test tone does not output from the subwoofer.
Disc Audio |
Disc Subtitle |
Disc Menu |
Rating |
Password |
TV Aspect |
Menu Language |
TV Output Select |
Pseudo PAL |
Digital Audio Output 5.1 Speaker Setup
|
|
|
|
|
|
|
|
| R |
|
|
|
| R |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Rear L/R |
|
|
| ||||
Volume: | 0 dB | ||||||
Size | : |
| Large | ||||
Delay | : |
| 2 ms | ||||
Test |
|
|
|
|
| ||
Return |
|
|
|
|
|
Volume: Press F/G to adjust the output level of selected speaker.
Size: Press F/G to set a mode. (Large, Small, None)
• | If you have connected the system to a speaker |
| with low frequency of 100Hz or below, select |
| “Large” |
• | If you have connected the system to a speaker |
| without low frequency of 100Hz or below, select |
| “Small” But if you haven’t connected to sub |
| woofer, always select “Large” of Front Speaker |
| (L/R). |
• | When you don’t connect to speaker, select “None”. |
• | Front L/R speaker’s size can be selected to Large” |
| or “Small”. |
|
|
| (A) |
|
| |
L | C |
| R | |||
|
|
|
| |||
|
|
|
|
|
| |
|
|
| DC | DF | ||
|
|
|
|
|
|
|
SW
|
| DS | ||
| SL | SR |
| (B) |
|
| |||
|
|
•Setting Centre Speaker If the distance of DC is equal to or longer than the DF in the left figure, set the mode as 0ms.
Otherwise, change the setting according to the table below.
(A) = DF - DC
Distance of (A)(cm) | Setting(ms) |
34 | 1 |
68 | 2 |
102 | 3 |
136 | 4 |
170 | 5 |
• If Front L/R speaker’s size is selected to “Small”, |
Rear and Centre speaker’s size can be selected to |
“Small” or “None”, and Sub woofer speaker’s size |
can be selected only to “Large”. |
Delay: Press F/G to customize the sound to conform to the acoustics of your room by adding a delay effect to the sound of the Centre Speaker and Surround Speaker.
•When 5.1CH Surround is played, you can enjoy the best sound if the distance between you and each speaker is same. You can set Delay time in the Centre/Surround Speaker to customize the sound to to the acoustic of your room.
•Setting Rear Surround Speaker
If the distance of DF is equal to the distance of DS in the above, set the mode as 0ms. Otherwise, change the setting according to the table below.
(B) = DF - DS
Distance of (B)(cm) | Setting(ms) |
170 | 5 |
340 | 10 |
510 | 15 |
Test : Press SELECT/ENTER to test signals of each speaker. Adjust Volume to match to the volume of test signals memorized in the system.
• Front (L) → Front (R) → Centre → Rear (L) → Rear (R)
Return: Press SELECT/ENTER to return to the previous menu screen.