LG Electronics DVD-3350E owner manual Before Calling Service Personnel, Symptoms and Correction

Page 43

REFERENCE

PAGE 43

BeforeCallingServicePersonnel

Symptoms and Correction

Check the following guide for the possible cause of a problem before contacting service.

Symptom		Cause		Correction

No power.	•	The power cord is disconnected.	• Plug the power cord into the wall outlet
				securely.

The power is on, but	•	No disc is inserted.	• Insert a disc. (Check that the DVD or,
the DVD player does				audio CD indicator in the DVD display is
not work.				lit.)

No picture.	•	The TV is not set to receive DVD signal	• Select the appropriate video input mode
		output.		on the TV so the picture from the DVD
				player appears on the TV screen.

	• The video cable is not connected		• Connect the video cable into the jacks
		securely.		securely.

	• The connected TV power is turned off.		•	Turn on the TV.

No sound.	•	The equipment connected with the	• Select the correct input mode of the
		audio cable is not set to receive DVD		audio receiver so you can listen to the
		signal output.		sound from the DVD player.

	• The audio cables are not connected		• Connect the audio cable into the jacks
		securely.		securely.

	• The power of the equipment connected		• Turn on the equipment connected with
		with the audio cable is turned off.		the audio cable.
	• The Digital Audio Output is set to the		• Set the Digital Audio Output to the
		wrong position.		correct position, then turn on the DVD
				player again by pressing the POWER
				button.
The playback picture is poor.	•	The disc is dirty.	•	Clean the disc.

The DVD player does	•	No disc is inserted.	• Insert a disc.(Check that the DVD, or
not start playback.				audio CD indicator in the DVD display is
				lit.)
	•	An unplayable disc is inserted.	• Insert a playable disc. (Check the disc
				type, color system and Regional code.)

	•	The disc is placed upside down.	• Place the disc with the playback side
				down.
	•	The disc is not placed within the guide.	• Place the disc on the disc tray correctly
				inside the guide.

	• The disc is dirty.		•	Clean the disc.

	• A menu is on the TV screen.		• Press the SETUP button to turn off the
				menu screen.
	•	The Rating level is set.	• Cancel the Rating function or change
				the rating level.

The remote control	•	The remote control is not pointed at the	• Point the remote control at the remote
does not work properly.		remote sensor of the DVD player.		sensor of the DVD player.

	• The remote control is too far from the		• Operate the remote control within about
		DVD player.		23 ft (7 m).

	• There is an obstacle in the path of the		•	Remove the obstacle.
		remote control and the DVD player.

	• The batteries in the remote control are		•	Replace the batteries with new ones.
		exhausted.

Image 43

Contents DVD Player To Rain or Moisture Safety PrecautionsTable of Contents Use a soft, dry cloth for cleaning PrecautionsMoisture condensation occurs during the following cases On Handling Discs On Cleaning DiscsOn Storing Discs Front Panel Identification of ControlsDisplay Window TV System Select Rear PanelIdentification of Controls con’d Insert batteries AAA size Preparing the Remote ControlOperating with the Remote Control Open the battery coverConnect the DVD player to your TV Connecting to a TVConnecting to an Audio System DVD recorded in Dolby Digital Connecting to Optional Audio SystemEnjoying Dolby Digital Sound Dolby DigitalEnjoying Dolby Digital 5.1 CH Sound Dolby Pro Logic Surround Enjoying Dolby Pro Logic Surround SoundWith a receiver equipped with Dolby Digital Connection example Enjoying 2 Channel Digital Stereo SoundEnjoying DTS Sound Channel Digital StereoBasic Playback After operation Frame advance DVD only Stopping PlayResume Play Still Picture PauseTo scan at fast forward or fast reverse Release the Shuttle ring to resume the still picture modeVarious speed playback with Shuttle Ring To play in slow-motionGeneral Information about GUI menu icons Common proceduresNumeric Detailed description of each GUI menu icon01657 1657Using a DVD menu Using a title menuIt will appear on the TV screen as below Memorizing Settings for Viewed DVDs Condition MemoryLoad the DVD that has memorized Press F/G to select Yes and pressChanging audio soundtrack language Changing subtitle languageProducing a 3D Surround effect Viewing from another angleRepeating viewing listening Repeat PlayRepeating sections between two specific points A-B repeat Storing a marker in the memory Storing markers in memory to be viewed listened to againRecalling/Clearing a marker Random play Zoom featureClearing the program Program playPlayback with MP3 To play an MP3 file Playback with MP3 To program play an MP3 file Common procedures of initial settings Common procedures of initial settingsDisc Subtitle and Disc Menu are selected by Selecting disc languagesSame method Rating and press G Selecting rating level and passwordAt the Setup screen, press D/ E to select Selecting rating level DVD onlyTo change/clear memorized password To clear your 4-digit passwordPress D/ E to select the desired Aspect At the Setup screen, press D/ E to select TVSelecting TV Aspect Aspect and press GSelecting TV Output Selecting Menu LanguageSelects language for DVD menus and displays On the TV Selecting Pseudo PAL Press D/E to select the desired mode and press SELECT/ENTERPlayback Selecting Digital Audio OutputDisc Press F/G to select the desired speaker Press D/E/F/G to adjust optionsSetting Rear Surround Speaker Selecting SpeakerCode Language Table of Language and Their AbbreviationsAudio CDs Disc mark Contents Disc size Maximum playback timeDisc Requirements/Copyright Information Playable DiscsSymptoms and Correction Before Calling Service PersonnelSymptom Cause Correction DVD player/Outputs/Supplied Accessories SpecificationsDVD player Outputs Supplied Accessories Page Page Page Technology with the human touch Please complete for your own record