LG Electronics 27MP35HQ owner manual Mounting on a wall, Model

Page 10

ASSEMBLING AND PREPARING 9

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1Please, Use the screw and wall mount interface in accordance with VESA Standards.

2If you use screw longer than standard, the monitor might be damaged internally.

3If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

4VESA compatible.

5Please use VESA standard as below.

y y784.8 mm (30.9 inch) and under

*Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm

y y787.4 mm (31.0 inch) and above

*Please use VESA standard wall mount pad and screws.

Model

 

 

 

 

27MP35HQ

 

 

 

 

 

 

 

 

 

 

 

 

VESA (A x B)

 

100 x 100

Standard screw

 

M4

Number of screws

4

 

CAUTION

y yDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

y yIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

y yUse only an authorized LG wall mount and contact the local dealer or qualified personnel.

y yDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

y yUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

y yUse the screws that are listed on the VESA standard screw specifications.

y yThe wall mount kit will include an installation manual and necessary parts.

y yThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

y yThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

y yFor more information, refer to the instructions supplied with the wall mount.

ENGLISH

Image 10
Contents IPS LED Monitor Page Contents Assembling and Preparing UnpackingParts and buttons Attaching the Stand Base Setting up the Monitor setStand Body Detaching the Stand Base BodyMounting on a table Using the cable holderCable holder FrontRear Model Mounting on a wallVesa a x B 100 x Standard screw Number of screws Hdmi connection Using the Monitor SETConnecting to a PC SUB connectionYSelf Image Setting Function ‘AUTO’ FunctionMonitor set Buttons Customizing SettingsExit Menu Settings Customizing SettingsHdmi Picture Menu Next Menu Picture Description SharpnessColor Temp Custom ColorMenu Next Menu Color Description Gamma HueAudio DisplayNoise and clear or sharpen the image of characters Set will automatically switch to standby mode OthersReader Setting YSAVING DATAW/h FUNC. SettingSuper Energy Saving Picture Mode Description Custom Picture ModeVivid Off RESOLUTION+FUNC. Super MiddleDual Display Dual WEBNo image appears TroubleshootingCheck Control Panel Display Settings and adjust the display Do you see a OSD Locked message on the screen?1080P SettingsScreen is flickering SPECIFICATIONS‌ 27MP35HQPreset Modes Resolution IndicatorProper posture for using the Monitor set Proper PostureDeclaration of Conformity