CUSTOMIZING SETTINGS 19
FUNC. Setting
SUPER ENERGY SAVING
1Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD.
2Enter to SUPER ENERGY SAVING by pressing the ▼ button.
3Set the options by pressing the ◄ or ► or ▼buttons.
4Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow (
) button.
ENGLISH |
Each option is explained below.
SUPER ENERGY SAVING | Description |
High | Enables SUPER ENERGY SAVING you can save energy with this energy- high efficient function. |
Low | Enables SUPER ENERGY SAVING you can save energy with this energy- low efficient function. |
Off | Disables SUPER ENERGY SAVING. |
NOTE
y yTOTAL POWER REDUCTION: How much power is saved while using the monitor.
yyTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
yySAVING DATA(W/h)
| 685 mm |
| (27 inch) |
|
|
SUPER SAVING(High) | 8 W/h |
|
|
SUPER SAVING(Low) | 4 W/h |
|
|
y ySaving Data depends on the Panel. So,those values should be different from each panel and panel vendor.If option of Super Energy Saving is High or Low, monitor luminance become higher or lower depend on source.
y yLG calculated these values by using “broadcast video signal” (including broadcast video: IEC 62087)
y ySUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.
y yIf option of Super Energy Saving is High or Low, Picture Mode will automatically be Custom and Reader Mode will automatically be Reader Off.