HDMI connection
If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable.
1.Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
2.Connect the HDMI OUT jack on the unit to the HDMI jack on a HDMI compatible TV or monitor (H).
3.Press RESOLUTION repeatedly to select the desired resolution.
Notes :
•Both PCM and Bitstream Audio out is available, when the sample frequency is set to 48kHz in HDMI connection.
•If Audio setup is set to bitstream and your TV does not support Bitstream Audio out in HDMI connection, audio sound may not output or distorted.
•When the no sound or noisy sound are output with HDMI connection, set the Audio option [Dolby Digital, DTS or MPEG] in the SETUP menu to PCM or Off.
•The arrow on the cable connector body should face up for correct alignment with the connector on the player.
•If there is noise or lines on the screen, please check the HDMI cable.
•Not all
•If your HDMI TV does not support HDCP, the blue screen appears on the screen.
Tip:
When you use HDMI connection,you can change the resolution (480i,480p,720p,1080i)for the HDMI output.
The HDMI will out at 480p resolution,even if you set the resolution to 480i on the HDMI connection.
HDMI compatible TV
HDMI
H
Rear of DVD player
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players,
HDMI was developed to provide the technologies of HDCP
HDMI has the capability to support standard, enhanced, or
HDMI, the HDMI logo and
10