CARE AND MAINTENANCE
BELTS:
Check belts every 50 hours. Replace any belts found to be in poor condition.
BELT TENSION:
Engine to Mower Deck Belt: | P/N 6111 (50”) |
| P/N 6938 (60”) |
The engine to mower deck drive belts are automatically held in proper tension by springs which push the deck assembly forward and do not require any additional adjustment to be made.
Mower Deck Serpentine Belt: P/N 1300 (50”)
P/N 6939 (60”)
Refer to illustration for adjustment procedure.
Idler Weldment | Idler Shock Mount | ||||
| |||||
“L” Rod |
|
|
|
| Hex Nut |
|
|
|
|
| 5/8” |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| Tighten or | ||
|
|
| loosen hex | ||
|
|
|
|
| nut to |
|
|
| achieve this | ||
|
|
| demension | ||
Note: Belt deflection or movement should be approximately 1/4” when measured at
36
