Manuals / Dixon / Lawn and Garden / Lawn Mower

Dixon ZTR 2300 manual Steering Control Adjustments, To adjust neutral, Care And Maintenance

Models: ZTR 2300

1 52

Download 52 pages 9.56 Kb

Page 46

Image 46

CARE AND MAINTENANCE

STEERING CONTROL ADJUSTMENTS:

To adjust neutral:

1.Lift seat.

2.Block up the unit so that the drive wheels are off the ground.

3.Loosen ball joint jam nuts on control rod.

Note: The front jam nuts are left hand threads.

4.With steering control arms in the “out” neutral position, start the engine and run at fast idle.

5.Adjust the neutral position by turning the control rod until the wheels do not rotate.

6.Re-tighten the jam nuts on the control rod and check to see that the drive wheels are not turning.

7.Repeat steps 3-6 for the other side.

8.Shut off engine before removing the blocks.

Page 46

Image 46

Dixon ZTR 2300 manual Steering Control Adjustments, To adjust neutral, Care And Maintenance

Contents

1950-2300 Series Model YearIMPORTANT - READ CAREFULLY Standard Service Parts List 1950/2300 Series Page Safety Warranty Policy SpecificationsControls Operation Instructions Care & Maintenance Troubleshooting INDEXCAN CAUSE SERIOUS INJURY OR DEATH SAFETYRIDING LAWN MOWERS IF IMPROPERLY OPERATED BLADE CONTACT TIP OVER RUN OVER BACK OVERSAFETY Follow recommended safety precautions and safe operating practicesSafety Alert Symbol When you see this symbol BE ALERT to the potential for injuryGENERAL OPERATION SAFETYGENERAL OPERATION continued SAFETYSLOPE OPERATION SAFETYDO NOT SLOPE OPERATION continuedDO continued SAFETYSERVICE SAFETYSERVICE continued SAFETYTragic accidents can occur if the operator is NEVER assume children will stay where they were last seenCHILDREN not alert to the presence of childrenDIXON LIMITED WARRANTY POLICY Pro Models 1950 ~ 2300 ~ SPECIFICATIONS Model ZTR 1950 and2. Slide seat forward or backward 3. Release seat slide adjuster SEAT ADJUSTMENT INSTRUCTIONS1. Grasp seat slide adjuster and move it into adjustment position Models 1950CONTROL LEVERS CONTROLSNote The pressure required to operate the mower is very light THROTTLE CONTROL LEVER CHOKE CONTROL LEVERCONTROLS TO SET PARKING BRAKE PARKING BRAKEHYDRO GEAR SYSTEM CONTROLSMOWER DECK CUT HEIGHT LIFT LEVER BLADE DRIVECIRCUIT BREAKER NOTE Always use high position for transportOPERATION INSTRUCTIONS TOWINGBEFORE OPERATING MOWER OPERATION INSTRUCTIONSTO FREE WHEEL MACHINE UNLOCK TRANSMISSION OPERATION INSTRUCTIONSENGINE SHOULD STOP TESTING OF SAFETY INTERLOCK SYSTEMSOPERATION INSTRUCTIONS 5. Maintain Sharp Blades Throughout The Cutting Season SIDE DISCHARGE OF THE CLIPPINGSOPERATION INSTRUCTIONS GRASS HEIGHT AND CUTTING SUGGESTIONS OPERATION INSTRUCTIONSSTARTING INSTRUCTIONS cold engine OPERATION INSTRUCTIONSSTARTING INSTRUCTIONS engine has been operated OPERATION INSTRUCTIONSMOWING WITH A MULCHING ATTACHMENT OPERATION INSTRUCTIONS6. CUT HIGH - MOW OFTEN MOWING WITH A MULCHING ATTACHMENT continuedOPERATION INSTRUCTIONS 6. Maintain Sharp Blades Throughout The Cutting Season MOWING WITH A GRASS CATCHER ATTACHMENTOPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENT continued OPERATION INSTRUCTIONSDECK ROLLERS 60” deck OPERATION INSTRUCTIONSBefore performing any maintenance, turn off engine CARE AND MAINTENANCEMAINTENANCE SCHEDULE allow to cool & remove key Use extreme care when working on machineryTIRES BATTERYENGINE CARE AND MAINTENANCECUTTER BLADE MAINTENANCE CARE AND MAINTENANCEEngine to Mower Deck Belt BELTSBELT TENSION P/N 6111 50”LUBRICATION FUEL SHUT OFF VALVECARE AND MAINTENANCE CHANGING THE ENGINE OIL CARE AND MAINTENANCE3. The use of any other oil filter may cause damage to the engine OIL FILLOIL FILTERS CARE AND MAINTENANCERECOMMENDED OIL WEIGHT HYDROSTATIC TRANSMISSION OIL & FILTER SERVICESERVICE INTERVALS Dirt or water in oil can ruin the hydrostatic transmissionsprotect your environment HYDROSTAT OIL MAINTENANCE PROCEDUREPlease dispose of used oil at proper collection centers CARE AND MAINTENANCEPARTS/SERVICE CLEANING THE MOWERWARRANTY ELECTRICAL SYSTEMSMOWER DECK REMOVAL CARE AND MAINTENANCEMOWER DECK LEVELING PROCEDURE CARE AND MAINTENANCEMOWER DECK LEVELING PROCEDURE continued CARE AND MAINTENANCETo adjust neutral STEERING CONTROL ADJUSTMENTSCARE AND MAINTENANCE To adjust neutral springs STEERING CONTROL ADJUSTMENTS continuedCARE AND MAINTENANCE 2. ENGINE WILL TURN OVER BUT WON’T START TROUBLESHOOTING1. ENGINE WON’T TURN OVER 3. HARD TO START ENGINE6. ENGINE RUNS BUT MOWER WON’T MOVE FORWARD 7. MOWER LOSES POWER OR TRANSMISSION OVERHEATS8. ENGINE STALLS WHEN BLADES ARE ENGAGED 9. DRIVE SYSTEM50” Deck STANDARD SERVICE PARTS LIST60” Deck Mower Model Number OWNER INFORMATIONDate Purchased Purchased FromDixon and ZTR are registered trademarks of Dixon Industries, Inc ZTRMowersdefects or other reproductive harm