HDMI connection
If you have an HDMI TV or monitor, you can connect it to this player using an HDMI cable.
1.Connect the HDMI OUT jack on the player to the HDMI jack on an HDMI compatible TV or monitor
(H).
2.Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
3.Press RESOLUTION repeatedly to select the resolution you wish to change.
HDMI compatible TV
HDMI
H
Setup
Notes :
•Both PCM and Bitstream Audio out is available, when the sample frequency is set to 48kHz in HDMI connection.
•If Audio setup is set to bitstream and your TV does not support Bitstream Audio out in HDMI connection, audio sound is converted to PCM.
•If Audio setup is set to bitstream and the sound is distorted, check your TV’s audio capability and set the Audio setup to PCM.
•The arrow on the cable connector body should face up for correct alignment with the connector on the player.
•If there is noise or lines on the screen, please check the HDMI cable.
•Not all
•If TV does not support HDCP, snow noise appears on the screen.
Tip:
When you use HDMI connection, you can change the resolution (576i, 576p, 720p, 1080i) for the HDMI output by pressing the RESOLUTION button on the remote control.
Rear of DVD player
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or
Connection to an HDMI TV requires an HDMI cable while connection to a
HDMI has the capability to support standard, enhanced, or
HDMI, the HDMI logo and
Installation and
11