LG Electronics DP170 owner manual Troubleshooting, Symptom Cause Correction

Page 34

Troubleshooting

Symptom

 

Cause

 

Correction

No power.

The power cord is disconnected.

• Plug the power cord into the wall outlet securely.

 

 

 

 

 

• The battery is discharged.

Recharge the battery.

 

 

 

 

No picture on the LCD or

The video cable is not connected securely.

• Connect the video cable into the jacks securely.

TV (including video from

 

 

 

 

• The AV IN/DVD switch is not set correctly.

• Set the AV IN/DVD switch correctly.

another unit).

 

 

 

- While you are playing a disc, set the AV IN/DVD

 

 

 

 

 

 

 

 

switch to DVD mode

 

 

 

 

- While you are viewing video from other equipment,

 

 

 

 

set the AV IN/DVD switch to AV IN mode.

 

 

 

 

 

 

LCD mode is set to OFF.

Select a LCD mode other than OFF.

 

 

 

 

 

• Check that Brightness control is set to “–”.

Adjust the brightness.

The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV so the picture from the DVD player appears on the screen.

No sound.

The equipment connected with the audio cable is not

• Select the correct input mode of the audio receiver so

set to receive DVD signal output.

you can listen to the sound from the DVD player.

 

 

 

 

 

• The audio cables are not connected

• Connect the audio cable into the jacks securely.

 

securely.

 

 

 

 

 

The DVD player does not

• An unplayable disc is inserted.

• Insert a playable disc. (Check the disc type, color

 

system and Regional code.)

start playback.

 

 

 

 

• The Rating level is set.

• Cancel the Rating function or change the rating level.

 

 

 

 

No response when buttons

• Some discs prohibit certain operations.

• “

” may appear on the screen during operation.

 

 

 

are pressed.

 

 

 

 

 

 

The Remote Control does

• The Remote Control is too far from the

• Operate the Remote Control within about 23 ft (7 m).

not work properly.

DVD player.

 

 

34

Image 34
Contents Portable DVD Player Safety Precautions Introduction Cleaning Discs Symbol Used in this ManualAbout the Symbol Display Handling Discs Before UseDVD Regional CodeTable of Contents Identification of Controls Main UnitRemote sensor Battery charge indicatorDC 9.5V Reverse SKIP/SEARCHRemote Control Insert the battery Lithium battery Follow steps 1 to 2 to connect Power ConnectionAdapter AC adapterAutomotive Adapter Automotive adapterDetaching the battery pack 1. Press the Release knob Battery PackAttaching the battery pack supplied HooksIf there is not enough battery, flashes on the LCD screen Charging the battery packRecharging and play times Audio/Video Connection Audio Connection to Optional Equipment Rotate the LCD Initial Setting General OperationDisplay Mode DVD TV Aspect DVDSample Freq. Frequency DVD Dolby Digital / DTS / Mpeg DVDDRC Dynamic Range Control DVD If you have entered password already If you have not entered password yetRating DVD To change the password PasswordTo make a new password If you forget your passwordOthers Auto Play DVDGeneral Feature On-Screen Display DVDMarker Search DVD VCD Search DVD VCDStill Picture and Frame-by-Frame Playback DVD VCD Storing a marker in the memorySubtitles DVD Repeat A-B DVD VCDCamera Angle DVD Screen SaverPlaying an Audio CD or MP3/WMA Disc Audio CDRepeat Track/All/Normal CD MP3 WMA Audio CD and MP3 / WMA Disc FeaturesMoving to another Track CD MP3 WMA Repeat A-B CD MP3 WMAStill Picture Jpeg Using this DVD Player you can view discs with Jpeg filesViewing a Jpeg Disc Zoom JpegFor details on each operation item, refer to relevant Programmed playback CD MP3 WMAErasing a Track from program list Maintenance and Service Handling the UnitLanguage Code List Language CodeArea Code List Area CodeTroubleshooting Symptom Cause CorrectionSpecifications