Initial Setting (Continued)
Password
You can create or change password.
1.Select Password on the LOCK menu then press B. The “Change” is highlighted
2.Press ENTER then the password window will appear.
3.To make a new password:
When the “New Password” section is highlighted, enter a
To change the password:
When the “Old Password” section is highlighted, enter the
4.Press SETUP to exit the menu.
If you forget your password
If you forget your password you can clear it using the following steps:
1.Remove any disc from the unit and close the disc tray.
2.Press SETUP and setup menu appears on the TV screen. Use the numbered buttons to enter the
3.Enter a new password as described above.
Area Code DVD
Enter the code of the area whose standards were used to rate the DVD video disc, based on the list in the reference chapter.
1.Select “Area Code” on the LOCK menu then press B.
2.Select the first character using v / V buttons.
3.Shift the cursor using B button and select the second charac- ter using v / V buttons then press ENTER,
the password window will appear.
4.Press ENTER, the password window will appear.
5.If you have not entered password yet:
When the “New Password” section is highlighted, enter a
If you have entered password already:
Enter a
6.Press ENTER to confirm your Area Code selection, then press SETUP to exit the menu.
22