LG Electronics BP730N owner manual Advanced Setting, Use w/sto select Wired and press Wheel

2

Connecting

18Connecting

1. Select [Connection Setting] option in the	2. Use w/s/a/dto select the IP mode
[Settings] menu then press Wheel ( ).	between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP address automatically.

2.Read the preparations for the network settings and then press Wheel () while [Start] is

highlighted.,,Note

Network will automatically be connected to the unit.

Advanced Setting

If you want to set the network settings manually, use w/sto select [Advanced Setting] on the [Network Setting] menu and press Wheel ().

1.Use w/sto select [Wired] and press Wheel ().

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server].

3.Select [Next] and press Wheel () to apply network settings.

Network connection status is displayed on the screen.

4.Press Wheel () while [OK] is highlighted to finish the wired network settings.