LG Electronics 62DC1D, 56DC1D Mode Only, Monitor Display Specifications RGB-PC or HDMI/DVI Mode

Notes:

-Depending on the graphics card, DOS mode may not work if a HDMI1 to DVI Cable is in use.

-When Source Devices connected with HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position and Size may not fit to Screen. As shown the picture below, press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service center.

-When Source Devices connected with HDMI/DVI Input, output TV SET Resolution(480p, 720p, 1080i) and TV SET Display fit EIA/CEA-861-B Specification to Screen.

If not, refer to the Manual of HDMI/DVI Source Devices or contact your service center.

-In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "No signal" OSD dis-play in HDMI/DVI Input. In case that Video Resolution is not supported TV SET output in HDMI/DVI Source Devices, "Invalid Format" OSD display. Refer to the Manual of HDMI/DVI Source Devices or contact your service center.

Monitor Display Specifications (RGB-PC or HDMI/DVI Mode)

Resolution	Horizontal	Vertical
	Frequency(KHz)	Frequency(Hz)
640x350	31.468	70.09	RGB-PC
			Mode Only
	31.469	59.94
640x480	37.861	72.80
	37.500	75.00
	35.156	56.25
800x600	37.879	60.31
	48.077	72.18
	46.875	75.00
	48.363	60.00
1024x768	56.476	70.06
	60.023	75.02

Owner’s Manual 19