Connections (Continued)
Connecting to an Amplifier
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic
Connect the Left and Right AUDIO OUT jacks on the DVD Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
1AUDIO OUT jacks (OPTICAL O or COAXIAL X) to
the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.Connect one of the DVD Recorder’s DIGITAL
2 You will need to activate the recorder’s digital out- put. (See “Audio” on page 24).
Digital Multi-channel sound
A digital
Caution:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
otes
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–Six Channel Digital Surround Sound via digital con- nection can only be obtained if your receiver is equipped with a Digital
–To see the audio format of the current DVD in the on- screen display, press AUDIO.
–This recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.
Rear of DVD Recorder
DVR HOOKUP
X | A | O |
COAXIAL | L | R | OPTICAL |
DIGITAL INPUT | AUDIO INPUT | DIGITAL INPUT | |
Amplifier (Receiver)
17