Before Operation
Initial Settings
In this menu system, there are several ways to cus- tomize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings. If you press SETUP, only the first and second level of the menu sys- tem will appear on the TV screen. The third level can be displayed by pressing B. For navigating the menu lev- els, you will see “B” on the right side of the menu label to help you go to the next level.
To bring up and exit the Menu:
Press SETUP to bring up the menu. A second press of SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General Operation
1
2Use v / V to select the desired option.
3
4Use v / V to select the second desired option.
5Press B to move to the third level.
6 Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps.
7Press SETUP to exit the Setup menu.
General
Auto Programming
This DVD Recorder is equipped with a frequency synthesized tuner capable of receiving up to 88 TV channels.
Preparation:
Connect the DVD Recorder to the desired type of aerial, as shown in Connecting to the Aerial on page 15.
Stop
Searching 11%
1
2Use v / V to select the General option.
3 While the General option is selected, press B to move to the second level.
4 Use v / V to select the Auto Programming option.
5
6The tuner will automatically cycle through all
available channels in the area and place them in the tuner’s memory.Press ENTER to begin the channel search.
DVR HOOKUP
19