Optoma Technology Single Chip DLP Projector specifications Adjusting the Projected Image

English

Installation

Adjusting the Projected Image

Adjusting the Projector Height

The projector is equipped with an elevator foot for adjusting the projector height.

To raise the projector:

1.Press the elevator button Œ.

2.Raise the projector to the desired display angle •, then release the button to lock the elevator foot into position.

3.Use Ž to fine-tune tilt-adjustment.

To lower the projector:

1.Press the elevator button.

2.Lower down the projector, then release the button to lock the elevator foot into position.

3.Use Ž to fine-tune tilt-adjustment.

1

Elevator Button 2

Elevator Foot 3

12