English
User Controls
Computer mode
Language Management PIP
BrightnessZoom
ContrastKeystone
Color Temp. | White Segment |
LowHigh
Brightness
Image-I (Computer mode)
Adjusting the brightness of the image.
4Press the 
to darken image.
4Press the 
to lighten the image. Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.
4Press the 
to decrease the contrast.
4Press the 
to increase the contrast. Color Temperature
Adjust the color temperature. The range is from “0” to “3”. The factory default is “2”. With the higher temperature, the screen looks colder; with the lower temperature, the screen looks warmer.
Zoom
4Press the 
to Magnify an image up to a factor of 32 times on the projection screen.
4Press the 
to Diminish the zoom in image. Keystone (Keystone Correction)
Adjust image distortion caused by tilting projection. (±16 degrees)
White Segment
Use the white segment control to set the white peaking level of DMD chip. 0 stands for minimal peaking, and 10 stands for maximum peaking. If you prefera stronger image, adjust toward the minimum setting. For a smooth and more natural image, adjust toward the minimum setting.
18