NEC NDV-28 owner manual Additional features

Notes on general features:

•On a Video CD with PBC, you must set PBC to Off on the setup menu to use the repeat function (See “PBC” on page 13).

•If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback cancels.

•Zoom may not work on some DVDs.

•When you are playing a DVD disc contains scenes recorded different camera angles, the angle indicator will blink on the TV screen during scenes recorded at different angles as an indication that angle switching is possible.

Additional features

Time Search DVD VCD

To start playing at any chosen time on the disc:

1.Press DISPLAY during playback.

2.Press b / B to select the time clock icon and “-:--:--” appears.

3.Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers.

4.Press ENTER to confirm. Playback starts from the selected time.

Marker Search DVD VCD

To enter a Marker

You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers.

To Recall or Clear a Marked Scene

1.During disc playback, press SEARCH. The marker search menu appears on the screen.

2.Within 10 seconds, press b / B to select a marker number that you want to recall or clear.

3.Press ENTER and playback starts from the marked scene. Or, Press CLEAR and the marker number is erased from the list.

4.You can play any marker by inputting its number on the marker search menu.

Last Scene Memory DVD ACD VCD

This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the player. If you load a disc that has the scene memorized, the scene is automatically recalled.

Note:

This player does not memorize the scene of a disc if you switch off the player before commencing to play the disc.

Screen Saver

The screen saver appears when you leave the DVD player in Stop mode for about five minutes. If the Screen Saver is displayed for five minutes, the DVD Player automatically turns itself off.

System Select

You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE/STEP for more than 5 seconds to be able to select a system (PAL, NTSC, or AUTO).

Introduction

Installation and Setup

Operation

Reference

15