NEC X461UN user manual Picture, Adjust, English-20

	Setting			Default
PICTURE
BRIGHTNESS		Adjusts the overall image and background brightness. Press + or - to adjust.		70
		Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot changed.
CONTRAST		Adjusts the image brightness in relationship to the background. Press + or - to adjust.		50
		Note: The sRGB picture mode is standard and cannot be changed.
SHARPNESS		Adjusts the crispness of the image. Press + or - to adjust.		50*2
BLACK LEVEL		Adjusts the image brightness in relationship to the background. Press + or - to adjust.		50
		Note: The sRGB picture mode is standard and cannot be changed.
TINT		Adjusts the tint of the screen. Press + or - to adjust.		50
COLOR		Adjusts the color depth of the screen. Press + or - to adjust.		50*2
COLOR TEMPERATURE		Adjusts the color temperature of the entire screen. A low color temperature will make the screen		10000K
		reddish. A high color temperature will make the screen bluish. If TEMPERATURE needs further
		adjustment, the individual R/ G/ B/ levels of the white point can be adjusted. To adjust the
		R/G/B levels, CUSTOM must be showing as the COLOR TEMP selection.
		Note: The sRGB picture mode is set to a predefined 6500 K standard and cannot be changed.
COLOR CONTROL		Adjusts the levels of the Red, Yellow, Green, Cyan, Blue, Magenta and Saturation.		0
		Note: The sRGB picture mode is standard and cannot be changed.
GAMMA SELECTION		Select a display gamma for best picture quality.		PROGRAMMABLE
		Note: The sRGB picture mode is standard and cannot be changed.		(except sRGB
				setting)
	NATIVE	Gamma correction is handled by the LCD panel.
	2.2	Typical display gamma for use with a PC.
	2.4	Good for video (TV, DVD, etc.)
	S GAMMA	Special gamma for certain types of movies. Raises the dark parts and lowers the light parts
		of the image (S-Curve).
	DICOM SIM.	DICOM GSDF curve simulated for LCD type.
	PROGRAMMABLE	A programmable gamma curve can be loaded using NEC software.
MOVIE SETTINGS
	NOISE REDUCTION	Adjusts the amount of noise reduction. Press + or - to adjust.		6*2
	TV, VIDEO1, VIDEO2, S-VIDEO inputs only
	FILM MODE	Selects Film mode.		AUTO*2
	HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only
	ADAPTIVE CONTRAST	Sets the level of adjustment for dynamic contrast.		OFF
	HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only
PICTURE MODE		Selects picture mode, [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [AMBIENT1] or		STANDARD
		[AMBIENT2]. See page 18.
PICTURE RESET		Resets the following settings within the PICTURE menu back to factory setting:		-
		BRIGHTNESS, CONTRAST, SHARPNESS, BLACK LEVEL, TINT, COLOR, COLOR
		TEMPERATURE, COLOR CONTROL , GAMMA SELECTION, MOVIE SETTINGS.
ADJUST
AUTO SETUP		Automatically adjusts Screen Size, H position, V position, Clock, Clock Phase and White Level.		-
VGA, RGB/HV inputs only
AUTO ADJUST		H Position, V Position and Clock Phase are adjusted automatically upon power on.		OFF
VGA, RGB/HV inputs only
H POSITION		Controls the horizontal position of the image within the Display area of the LCD.		-
		Press + to move right. Press - to move left.
V POSITION		Controls the vertical position of the image within the Display area of the LCD.		-
		Press + to move up. Press - to move down.
CLOCK		Press + to expand the width of the image on the right of the screen.		-
VGA, RGB/HV inputs only		Press - to narrow the width of the image on the left.
CLOCK PHASE		Adjusts the visual ÒnoiseÓ on the image.		-
VGA, RGB/HV, DVD/HD1, DVD/HD2, SCART inputs only
*: The product you purchased may not have this feature.			*2: depend on signal input

English-20