NEC X461UN Preparation Before Use, Handling of the Address for Operation via a Browser, English

Page 33
Preparation Before Use

Preparation Before Use

Connect the monitor to a commercially available LAN cable before engaging in browser operations.

Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be reflected in operation. It is recommended that a proxy server not be used unless it is unavailable.

Handling of the Address for Operation via a Browser

Regarding the actual address that is entered for the address or entered into the URL column when operation of the monitor is via a browser, the host name can be used as it is when the host name corresponding to the IP address of the monitor has been registered to the domain name server by a network administrator, or the host name corresponding to the IP address of the monitor has been set in the ÒHOSTSÓ file of the computer being used.

Example 1: When the host name of the monitor has been set to Òpd.nec.co.jpÓ, access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for the address or the entry column of the URL.

Example 2: When the IP address of the monitor is Ò192.168.73.1Ó, access is gained to the mail alert settings by specifying http://192.168.73.1/index.html for the address or the entry column of the URL.

Network Settings

http://<the MonitorÕs IP address> /index.html

DHCP

Enabling this option automatically assigns an IP address to the monitor from your DHCP server.

 

Disabling this option allows you to register the IP address or subnet mask number obtained from

 

your network administrator.

 

NOTE: The IP address of the monitor is required to change the network setting.

 

The IP address will not be displayed on the MonitorÕs menu.

 

Consult your network administrator for the IP address when [ENABLE] is selected for

 

[DHCP].

 

 

IP ADDRESS

Set your IP address of the network connected to the monitor when [DISABLE] is selected for

 

[DHCP].

 

 

SUBNET MASK

Set your subnet mask number of the network connected to the monitor when [DISABLE] is selected

 

for [DHCP].

 

 

DEFAULT GATEWAY

Set your default gateway of the network connected to the monitor when [DISABLE] is selected for

 

[DHCP].

 

 

DNS (PRIMARY)

Set your primary DNS settings of the network connected to the monitor.

 

 

DNS (SECONDARY)

Set your secondary DNS settings of the network connected to the monitor.

 

 

UPDATE

Reflect your settings.

 

NOTE: Close the browser after clicking [UPDATE].

 

The monitor will automatically update your settings.

 

 

English

English-31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents UserÕs Manual MultiSync X461UNIndex For USA Declaration of conformityFor Canada EnglishImportant Information DeclarationDeclaration of the Manufacturer Safety Precautions, Maintenance & Recommended Use ¥ The lamps in this product contain mercury. Pleasedispose according to state, local or federal law Setup Manual ContentsPlease note the following when mounting on wall or ceiling InstallationMaintenance Mounting1. Attach Mounting Accessories Attaching Mounting Accessories2. Installing and removing optional table top stand 3. Ventilation RequirementsControl Panel Parts Name and FunctionsTerminal Panel Kensington Lock Remote control sensorAMBIENT LIGHT SENSOR Option board slotWireless Remote Control Optional Remote Control Handling the remote controlOperating Range for the Option 1. Determine the installation location Setup2. Install the remote control Optional batteries 4. Connect the supplied power cord8. Adjust the sound 6. Switch on the power of all the attached external equipment9. Adjust the screen See pages 20 and 10. Adjust the image See pageWiring Diagram ConnectionsBefore making connections Connecting a Personal Computer Connecting a DVD Player with HDMI outEnglish-15 Basic Operation Power ON and OFF ModesUsing Power Management Power IndicatorSelecting a video source Picture AspectAMBIENT parameter setting Picture ModeAMBIENT Mode Select Goto Adjustment Return Close OSD On-Screen-Display ControlsPICTURE MODE CARBON FOOTPRINTADJUST PICTUREEnglish-20 AUDIO SCHEDULEEnglish-21 English-22 English-23 MULTI DISPLAYDISPLAY PROTECTION ADVANCED OPTIONEnglish-24 RGB/HV inputs only English-25All inputs except VGA, RGB/HV VIDEO1, VIDEO2, S-VIDEO inputs onlyNOTE 1 CREATING A SCHEDULE For long life use as Public DisplayNOTE 2 IMAGE PERSISTENCE Image Sticking of LCD PanelREMOTE CONTROL ID FUNCTION Remote Control FunctionEnglish-28 WIRED REMOTE CONTROL FUNCTIONControlling the LCD monitor via RS-232C Remote Control ConnectionEnglish-29 Network Setting by Using an HTTP Browser Connecting to a NetworkControlling the LCD monitor via LAN Control OverviewPreparation Before Use Network SettingsHandling of the Address for Operation via a Browser English-31English-32 Alert Mail SettingEnglish-33 FeaturesTroubleshooting Specifications Product SpecificationsEnglish-35 English-36 Pin AssignmentDisposing of your old NEC product Manufacturer’s Recycling and Energy InformationEnergy Saving WEEE Mark European Directive 2002/96/EC
Top Page Image Contents