Terminal Panel
AC IN connector
Connects with the supplied power cord.
Main Power Switch
On/Off switch to turn main power ON/OFF.
DISPLAYPORT connector
To input DisplayPort signals.
HDMI connector
To input digital HDMI signals.
DVI IN (DVI-D)
To input digital RGB signals from a computer or HDTV device having a digital RGB output.
* This connector does not support analog input.
VGA IN (mini
To input analog RGB signals from a personal computer or from other RGB equipment.
RGB/HV IN [R, G, B, H, V] (BNC)
To input analog RGB signals or signals from other RGB equipment.
This is also to connect equipment such as a DVD player, HDTV device and
This input can be used with an RGB, DVD/HD or Video source. Please select signal type in TERMINAL SETTING.
| R | G | B | H | V |
RGB/HV | R | G | B | H | V |
DVD/HD2 | Pr | Y | Pb |
|
|
VIDEO2 |
| VIDEO |
|
|
|
RGB/HV OUT (BNC)
To output the signal from the RGB/HV IN connector or VGA IN connector which is on screen to an input on a separate device. If both signals are not on screen, outputs the signal from RGB/HV IN connector.
English
In 
Out
InOut
VIDEO IN connector (BNC and RCA)
To input a composite video signal. BNC and RCA connectors are not available at the same time (Use only one input).
VIDEO OUT connector (BNC)
To output the composite video signal from the VIDEO IN connector.
DVD/HD connector (RCA)
Connecting equipment such as a DVD player, HDTV device, or
To input the
AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a computer, VCR or DVD player.
AUDIO OUT
To output the audio signal from the AUDIO IN 1, 2, 3, DPORT, HDMI, and TV jack to an external device (stereo receiver, amplifier, etc.).
EXTERNAL CONTROL (D-Sub 9 pin)
IN connector: Connect
OUT connector: Connect
LAN port
LAN connection. See page 31.
REMOTE IN/OUT
Use the optional wired remote control by connecting it to your monitor.
NOTE: When you use Remote IN/OUT, IR CONTROL in OSD menu should be NORMAL.